XIAMETER™ PMX-200 Silicone Fluid 50 cSt
Properties
These values are typical properties and are not intended for use in preparing specifications.
- Detackification Yes No true
- Dry Combing Yes No true
- Flash Point Open Cup Yes No > 318 °C
- Flash Point, Closed Cup Yes No > 100 °C
- Hydrophobic Yes No true
- Improved Spreading Yes No true
- Increase Yes No Glide, Payout
- Kinetic / Kinematic Viscosity Yes No 50 Centistokes
- Low Odor Yes No true
- Non-Occlusive Yes No true
- Pour Point (°C) Yes No -70 °C
- Reduce Yes No White Residue
- Reduced Yes No Greasiness, Tackiness
- Refractive Index Yes No 1.4022
- Service Temperature High Yes No 200 °C
- Service Temperature Low Yes No -40 °C
- Shine Yes No true
- Soft Feel Conditioning - Dry Yes No true
- Specific Gravity @ 25C Yes No 0.96
- Surface Tension Yes No 20.8 mN/m
- Wet Combing Yes No true
You may also be interested in the following products:
-
XIAMETER™ PMX-0245 Cyclopentasiloxane
A volatile, low viscosity cyclopentasiloxane fluid for use in skincare, suncare, color cosmetics, hair care, and antiperspirant / deodorant applications. INCI Name: Cyclopentasiloxane
-
SYL-OFF™ 4000 Catalyst
General purpose catalyst which is compatible with all Syl-off™ brand solvent based and solventless release coating systems as well as Plantinum cure silicone PSAs.
-
ACUSOL™ 445N
FOR LAUNDRY is a fully neutralized, liquid detergent polymer for a variety of laundry applications, providing excellent performance properties such as the inhibition of crystal growth and the dispersion of precipitates. FOR WAREWASH is a fully neutralized, liquid detergent polymer for industrial machine dishwash applications, providing excellent performance properties such as the inhibition of crystal growth and the dispersion of precipitates.
-
XIAMETER™ OHX-4081 Polymer 80,000 cSt
A 100% actives, 80,000 cSt, Polydimethylsiloxane polymer with reactive silanol functionality.
-
CARBOWAX™ Polyethylene Glycol 8000 Flake (Inhibited)
High molecular weight Polyethylene Glycol that provides enhanced solvency, lubricity, hygroscopicity and other important functional properties in a wide range of formulations. Hard, waxy solid having the appearance of thin, irregularly shaped shards. The flake thickness is slightly variable within a range of approximately 0.02 – 0.07 inches. Chemically equivalent to its spherical granular counterpart, being produced from the same molten material. Owing to the lower surface area as compared to the granular form, the flaked grade exhibits longer relative dissolution times in water-based applications. This material contains the added stabilizer, BHT, at a nominal concentration of 100 PPM.
-
DOWSIL™ 791 Weatherproofing Sealant
A one-part, medium-modulus, elastomeric sealant designed for general weathersealing. It is a silicone formulation that cures to a flexible and curable silicone rubber building joint seal.
-
XIAMETER™ PMX-200 Silicone Fluid 350 cSt
100% active, 350 cSt, polydimethylsiloxane polymer. INCI Name: Dimethicone
- XIAMETER™ SLT-5431 Sealant Acetoxy Extended-M
-
ACUSOL™ OP 301
It imparts a milky, lotionized appearance to a wide variety of household liquid products.
-
XIAMETER™ PMX-0244 Cyclotetrasiloxane
A volatile methylsiloxane fluid, clear, odorless, VOC-exempt, low toxicity, low surface tension and evaporates completely at room temperature. INCI Name: Cyclotetrasiloxane
No Safety Data Sheets are available online for this material Please Contact Dow for additional information.
No Safety Data Sheets are available online for this material
Please Contact Dow for additional information.
