UNIVAL™ DMDC-6143 NT 7 High Density Polyethylene Resin
This has outstanding environmental stress crack resistance, excellent parison melt strength / low sag, good extrudability / processability, and good rigidity.
Properties
These values are typical properties and are not intended for use in preparing specifications.
- 2% Secant Modulus, MD (ASTM D882) in MPa (psi) Yes No 1000 (150000)
- 2% Secant Modulus, TD (ASTM D882) in MPa (psi) Yes No 1000 (150000)
- Anti-block Yes No false
- Brittleness Temperature in °C(°F) Yes No < -76.1
- Density (ASTM D792) Yes No 0.952 g/cm3
- ESCR-Environmental Stress Crack Resistance (100% IGEPAL) Yes No > 1100 hr
- Impact Strength in MPa (psi) Yes No 357 kJ/m2 (170 ft lb/in2) ASTM D1822
- Melt Index (g/10min @190°C/21.6 kg) Yes No 14 g/10minutes(190°C/21.6 kg)
- Slip Yes No false
- Tensile Elongation at Break, MD Yes No 900 %
- Tensile Elongation at Break, TD Yes No 900 %
- Tensile Strength Break, MD (ASTM D638) in MPa (psi) Yes No 37.9 (5500)
- Tensile Strength Break, TD (ASTM D638) in MPa (psi) Yes No 37.9 (5500)
- Tensile Strength Yield, MD (ASTM D638) in MPa (psi) Yes No 23.4 (3400)
- Tensile Strength Yield, TD (ASTM D638) in MPa (psi) Yes No 23.4 (3400)
No Safety Data Sheets are available online for this material Please Contact Dow for additional information.
No Safety Data Sheets are available online for this material
Please Contact Dow for additional information.
