UHS PLUS™ Emulsion

Overview
Sample Options
Buying Options
Technical Content
Technical Content
Find a Distributor

Outstanding Ultra High Speed Burnish Response. The floor finish polymer is a metal-crosslinked, modified acrylic polymer specifically designed to provide outstanding ultra-high-speed (UHS) burnish response and “wet look” gloss. UHS Plus-based finishes are ideally suited for a wide range of applications in retail stores and other areas where outstanding appearance is desired.

Benefits:

In frequently maintained environments, UHS PLUS™ polymer-based formulations show superior resistance to pad scratch “swirling”, outstanding gloss build and excellent repair of traffic damage.
Polishes based on UHS PLUS™ polymer exhibit excellent gloss retention after many months of extensive wear and frequent burnishing.
If a recoat is desired, UHS PLUS™ polymer-based polishes have excellent application and recoating properties to maintain superior gloss build.
UHS PLUS™ polymer-based formulations offer floors long-lasting, high-quality protection that provides valuable savings.
Formulations based on UHS PLUS™ polymer require no initial burnishing for the first 24 hours, providing an important labor-savings benefit.
Where desired, UHS PLUS™ polymer may be utilized in formulations at or below 25% total solids content.
As additional feature, UHS PLUS™ polymer formulation UHS-61-5 and UHS PLUS™ polymer formulation UHS-61-6 can be burnished 45-60 minutes after the final coat is dry. The formulations will withstand the rigorous demands of repeated maintenance and continue to provide “wet-look” response where eye-catching performance is a must.
To the best of our knowledge this product complies with California Prop 65*

*See Regulatory Datasheet for further details

Properties

These values are not intended for use in preparing specifications.

Typical Properties

Ease of Removability Yes No Excellent
Main Flooring Substrate Yes No Vinyl Composition Tile
Maintenance Frequency Yes No 4-7 times per week
Maintenance Procedure Yes No High Speed Burnishing, Ultra High Speed Burnishing
MFFT-Minimum Film Formation Temp Yes No >80 °C
Zinc-Based Crosslinking Yes No true

Sustainability and Safety

Ingredient Information Yes No APE Free

Speedy shine for retail floors

Looking to give floors the outstanding appearance of ”wet-look” gloss requires? UHS PLUS™ Floor Finish Polymer gives floors that appealing shine with the added benefit of an ultra-high speed (UHS) burnish response.

UHS PLUS™ polymer based finishes extend from dry to a high-gloss, deep luster appearance that exhibits excellent gloss retention.

Quantity({{ajax.content.bundlePriceData.priceTable.qtyUnitSapName}})	Unit Price({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}})
{{price.fromQuantity}} + {{price.fromQuantity}} - {{price.toQuantity}} {{price.fromQuantity}} +	{{price.priceData.formattedValue}}
Quantity({{ajax.content.bundlePriceData.priceTable.sapName}})	Unit Price({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}})
1 +	{{ajax.content.bundlePriceData.priceTable.displayFlatPrice}}