SYLGARD™ 160 Silicone Elastomer Kit

Two-part, 1 to 1 mix, dark gray, general purpose encapsulant with good flowability and flame resistance.

Properties

These values are typical properties and are not intended for use in preparing specifications.

Cure Type Yes No Addition Cure
Dielectric Constant at 100 Hz Yes No 3.51
Dielectric Constant at 100 kHz Yes No <= 3.45
Dielectric Strength Yes No 475 volts per mil v/mil
Dissipation Factor at 100 Hz Yes No 0.0047
Dissipation Factor at 100 kHz Yes No 0.00118
Durometer - Shore A Yes No 56 Shore A
Dynamic Viscosity Yes No 8775 Centipoise
Flowable Yes No true
Hydrophobic Yes No true
Linear CTE Yes No 200 um/m/Deg C
Low Odor Yes No true
Number of Parts Yes No Two
Polyesters Yes No true
Resistance Type Yes No Oxidation Resistance, Ozone Resistance, Thermal Resistance, UV Resistance, Water Resistance
Self Leveling Yes No true
Shelf Life Yes No 540 Days
Solventless Yes No true
Temperature Range Yes No -45 to 200 °C
Temperature Stable Yes No High, Low
Thermal Conductivity Yes No 0.62 Watts per meter K
Thermosetting Yes No true
Volume Resistivity Yes No 5.6e+014 ohm-centimeters
Water Resistant Yes No true
Working Time Yes No 20 Minutes

DOWSIL™ 791 Weatherproofing Sealant
A one-part, medium-modulus, elastomeric sealant designed for general weathersealing. It is a silicone formulation that cures to a flexible and curable silicone rubber building joint seal.

DOWSIL™ 9040 Silicone Elastomer Blend
A mixture of high molecular weight silicone elastomers (dimethicone crosspolymer) in cyclopentasiloxane for use in skincare, haircare, color cosmetics, suncare, antiperspirants and deodorants, and woundcare applications. INCI Name: Cyclopentasiloxane (and) Dimethicone Crosspolymer

DOWSIL™ 3-1953 Conformal Coating
One-part, translucent, fast moisture RTV cure with mild heat acceleration possible, soft, stress-relieving, contains UV indicator.

DOWSIL™ 1200 OS Primer
An air drying primer supplied as a dilute solution of moisture reactive materials in volatile siloxane and is used to improve both the quality and speed of adhesion development to room temperature vulcanizing silicone sealants to a variety of common non-porous substrates.

XIAMETER™ PMX-200 Silicone Fluid 100 cSt
100% active, 100 cSt, polydimethylsiloxane polymer. INCI Name: Dimethicone

SYLGARD™ 527 A&B Silicone Dielectric Gel
A two-part, 1 to 1 mix ratio dielectric gel that is suitable for sealing and protecting various electronic devices, especially those with delicate components.

SYL-OFF™ 4000 Catalyst
General purpose catalyst which is compatible with all Syl-off® brand solvent based and solventless release coating systems as well as Plantinum cure silicone PSAs.

DOWSIL™ 9041 Silicone Elastomer Blend
A mixture of high molecular weight silicone elastomers (dimethicone crosspolymer) in low viscosity dimethicone fluid for use in skin care, color cosmetics, sun care, antiperspirants and deodorants, and wound care applications. INCI Name: Dimethicone (and) Dimethicone Crosspolymer

DOWSIL™ 7091 Adhesive Sealant
High performance, neutral cure silicone adhesive/sealant.

XIAMETER™ PMX-200 Silicone Fluid 350 cSt
100% active, 350 cSt, polydimethylsiloxane polymer. INCI Name: Dimethicone