Properties
Application Benefits |
|
|---|---|
| Optical Function Type | Transparent |
Product Use and Formulating |
|
|---|---|
| Number of Parts | Two |
| Process | Injection Molding |
| Working Time | 2880 Minutes |
Typical Properties |
|
|---|---|
| Abbe Number, a.i. | 50 |
| Color | Clear |
| Dielectric Strength | 19 kV/mm |
| Durometer - Shore A | 72 |
| Elongation | 80 % |
| Hardness | 72 Shore A |
| Linear CTE | 275 ppm/°C |
| Luminous Transmittance (10 mm thickness) | 90 % |
| Mixing Ratio | 1:1 |
| Mixing Viscosity | 26 Pa.s |
| Refractive Index at 589.3nm | 1.41 |
| Specific Gravity | 1.07 |
| Specific Heat | 1.37 J/g.℃ |
| Tensile Strength | 12 MPa |
| Viscosity - Part A | 40 Pa.s |
| Viscosity - Part B | 18 Pa.s |
| Volume Resistivity | 1.00E+18 Ω・cm |
| Working Time at 25°C | 48 |
