Properties
As Supplied |
|
|---|---|
| Appearance | Milky white translucent |
| Plasticity | 280 mm/100 |
As Cured |
|
|---|---|
| Density | 1.21 g/cm3 |
| Durometer/Hardness, JIS Type A | 70 |
| Tear Strength Die-Angle | 31 N/mm |
| Tear Strength Die-Crescent | 21 N/mm |
| Tensile Elongation | 410 % |
| Tensile Strength | 7.8 MPa |
Curing Condition |
|
|---|---|
| Curing Agent | SILASTIC™ RC-8 Rubber Additive, 0.5 parts |
| Curing Condition, Molded | 10min/170 °C |
| Curing Condition, Post-cured | 4hours/200 °C |