Properties
As Supplied |
|
|---|---|
| Appearance | Grey white |
| Plasticity | 240 mm/100 |
As Cured |
|
|---|---|
| Density | 1.30 g/cm3 |
| Durometer/Hardness, JIS Type A | 72 |
| Tear Strength Die-Angle | 17 N/mm |
| Tear Strength Die-Crescent | 10 N/mm |
| Tensile Elongation | 240 % |
| Tensile Strength | 6.7 MPa |
Curing Condition |
|
|---|---|
| Curing Agent | SILASTIC™ RC-4 50P FD Rubber Additive, 0.5 parts |
| Curing Condition, Molded | 10min/170 °C |
| Curing Condition, Post-cured | 4hours/200 °C |