DOWSIL™ TC-2035 Adhesive A/B Kit
Two-part heat cure silicone highly thermally conductive adhesive with low bond line thickness.
Properties
These values are typical properties and are not intended for use in preparing specifications.
- Color - Part A Yes No White
- Color - Part B Yes No Reddish-Brown
- Cure Type Yes No Addition Cure
- Density (g/cm3) Yes No 3 g/cm3
- Dielectric Constant at 100 Hz Yes No 6
- Dielectric Constant at 100 kHz Yes No 5.9
- Dielectric Strength (kV/mm) Yes No 21 kV/mm
- Elongation JIS#3 Yes No 43 %
- Heat Cure Yes No 10 Minutes @ 150 Deg C, 30 Minutes @ 125 Deg C
- JIS Type-A Yes No 95
- Linear CTE Yes No 18 um/m/Deg C
- Pot Life Yes No >= 240 Minutes
- Primerless Adhesion Yes No Primerless
- Resistance Type Yes No Thermal Resistance
- Tensile Strength JIS#3 Yes No 3.6 MPa
- Viscosity Yes No 125000 mPa.s
- Viscosity (Part A) Yes No 130000 mPa.s
- Viscosity (Part B) Yes No 118000 mPa.s
- Volume Resistivity Yes No 5.5e+015 ohm-centimeters
No Safety Data Sheets are available online for this material Please Contact Dow for additional information.
No Safety Data Sheets are available online for this material
Please Contact Dow for additional information.
No sales specification could be found for this material in selected language
