DOWSIL™ Q1-4010 Conformal Coating

One-part, clear, heat cure, moderate strength, UL and Mil Spec, contains UV indicator.

Uses:

These values are not intended for use in preparing specifications.

Adhesion to Yes No Metal
Color Yes No Clear
Curable Coating Yes No true
Cure Characteristics Yes No Fast Heat Cure
Cure Type Yes No Addition Cure
Dielectric Constant at 100 Hz Yes No 2.85
Dielectric Constant at 100 kHz Yes No 2.63
Dielectric Strength Yes No 575 volts per mil v/mil
Dispensing Characteristics Yes No High Flow 350-850 cps
Dissipation Factor at 100 Hz Yes No 0.00271
Dissipation Factor at 100 kHz Yes No < 0.0003
Durometer - Shore A Yes No 33 Shore A
Durometer / Hardness Yes No Stress Relieving 15A-40A
Heat Cure Yes No 10 Minutes @ 100 Deg C
Number of Parts Yes No One
Resistance Type Yes No Thermal Resistance
Shear Yes No 130 psi
Solvent Type Yes No Solventless
Solventless Yes No true
Special Characteristics Yes No IPC-CC-830B Recognized, MIL Spec, UL Recognized
Temperature Range Yes No -45 to 200 °C
Temperature Stable Yes No High, Low
Thermosetting Yes No true
Viscosity Yes No 825 mPa.s
Volume Resistivity Yes No 2.11e+014 Ω・cm

Quantity({{ajax.content.bundlePriceData.priceTable.qtyUnitSapName}})	Unit Price({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}})
{{price.fromQuantity}} + {{price.fromQuantity}} - {{price.toQuantity}} {{price.fromQuantity}} +	{{price.priceData.formattedValue}}
Quantity({{ajax.content.bundlePriceData.priceTable.sapName}})	Unit Price({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}})
1 +	{{ajax.content.bundlePriceData.priceTable.displayFlatPrice}}