DOWSIL™ ME-1070 Adhesive Black
A one-part, black, flowable, high strength adhesive with self priming adhesion. It is a one-part, syringe dispensable, DRAM grade, die attach adhesive for microelectronics packaging.
Properties
These values are typical properties and are not intended for use in preparing specifications.
- Color Yes No Black
- Cure Type Yes No Addition Cure
- Dielectric Constant at 100 Hz Yes No 2.82
- Dielectric Constant at 100 kHz Yes No 2.81
- Dielectric Strength Yes No 475 volts per mil v/mil
- Dielectric Strength (kV/mm) Yes No 19 kV/mm
- Dissipation Factor at 100 Hz Yes No 0.0011
- Dissipation Factor at 100 kHz Yes No < 0.0002
- Durometer - Shore A Yes No 72 Shore A
- Elongation Yes No 25 %
- Flowable Yes No true
- Heat Cure Yes No 30 Minutes @ 150 Deg C
- Number of Parts Yes No One
- Primerless Adhesion Yes No Primerless
- Printable Yes No true
- Resistance Type Yes No Thermal Resistance
- Shear Yes No 1000 psi
- Specific Gravity @ 25C Yes No 1.2
- Temperature Stable Yes No High, Low
- Tensile Strength Yes No 500 psi
- Viscosity Yes No 20000 mPa.s
- Volume Resistivity Yes No 2.1e+015 ohm-centimeters
No Safety Data Sheets are available online for this material Please Contact Dow for additional information.
No Safety Data Sheets are available online for this material
Please Contact Dow for additional information.
No sales specification could be found for this material in selected language
