DOWSIL™ 502W Additive
Benefits:
- Wide range of products allows choice of exactly the right product for the application, allowing for cost-effective, optimum performance
- Consistent wetting performance across a wide range of formulations and over a wide range of substrates
- Can be used in both waterborne and UV cured paints, inks and coatings
- Improve wetting of difficult substrates, such as wood, plastic and metal
- Little or no impact on the coefficient of friction/slip properties
- Recoatable
- 100% active; low VOC, solvent-free and BTX-free
- Effective at low addition levels (recommended 0.1 to 0.4% as supplied, based on total formulation)
- Easy-to-use, low viscosity liquids
- Enable minimization of raw material portfolio
Properties
These values are not intended for use in preparing specifications.
Typical Properties
- Benefit Yes No Substrate Wetting
- Performance Benefits Yes No Leveling, Wetting
- Product Delivery Yes No Polymer
- System Yes No Radiation-Cured, Water Borne
- Target Formulation Yes No Water Borne
Dow introduces a family of Superwetter Additives for high-performance water-based and UV cured inks, coatings and overprint varnishes:
- DOWSIL™ 67 Additive
- DOWSIL™ 500W Additive
- DOWSIL™ 501W Additive
- DOWSIL™ 502W Additive
Do you have difficulty achieving effective substrate wetting with your waterborne or UV cured formulations, particularly on challenging substrates like wood, plastic and metal? Have you tried other silicone additives, only to see undesirable effects on slip properties?
With its range of functionalities and hydrophilicities, the new family of superwetter additives from Dow can be used in waterborne, solventborne and solventless radiation curable coatings. These additives can help you obtain the wetting performance you want for your formulation and substrate – and do so with little or no impact on slip properties.
Making an informed choice of Superwetter
Dow understands that every formulation is different. By providing more information about structure, end capping and hydrophilicity/HLB, Dow seeks to improve the quality of wetting additive choices. All four products in this DOWSIL™ Superwetter family are 100% silicone polyether copolymers and are characterized by being usable in both waterborne and UV coatings formulations, offering recoatability and a high level of consistency across different types of binders.
In addition:
Products | Silicone Polyether Copolymer (%) | Viscosity (cst) | HLB-EO | End Cap | Surface Tension (aqueous 0.1% solution) |
---|---|---|---|---|---|
DOWSIL™ 67 Additive | 100 | 31-51 | 11.5 | OH | 21.0 |
DOWSIL™ 500W Additive | 100 | 25.5-29.5 | 10.7 | OAc | 22.0 |
DOWSIL™ 501W Additive | 100 | 10-30 | 10.6 | OMe | 20.5 |
DOWSIL™ 502W Additive | 100 | 49-75 | 13.2 | OH | 22.4 |
Key features of DOWSIL™ 502W Additive
Besides excellent wetting performance at low addition levels, DOWSIL™ 502W Additive can be used when consistent low dynamic surface tensions under shear is required, which could provide benefits in high-speed coatings or printing and spray coatings.
High performance at low use levels
DOWSIL™ 67 Additive, DOWSIL™ 500W Additive, DOWSIL™ 501W Additive and DOWSIL™ 502W Additive provide excellent wetting performance at low addition levels with little or no influence on slip. In a waterborne PUD-based flooring coating, for example, all four additives provide excellent wetting performance versus competitive organic and silicone wetting additives over different substrates. The toolbox approach also enables formulators to choose the right product for a specific application, while at the same time reducing the number of products they must maintain in their raw material portfolios. The superior performance can be measured in multiple waterborne coatings by the surface appearance and coefficient of friction (Figures 1 and 2).
Figure 1: Surface appearance and slip properties of a waterborne, PUD-based wood coating with the addition of DOWSIL™ 67 Additive, DOWSIL™ 500W Additive, DOWSIL™ 501W Additive and DOWSIL™ 502W Additive. Additives were added at 0.2 weight percent in the total formulation.

Figure 2: Surface appearance and slip properties of a waterborne, acrylic-based wood coating with the addition of DOWSIL™ 67 Additive, DOWSIL™ 500W Additive, DOWSIL™ 501W Additive and DOWSIL™ 502W Additive. Additives were added at 0.2 weight percent in the total formulation.

High performance in high speed applications
DOWSIL™ 502W Additive can be used when consistent low dynamic surface tensions under shear is required, which could provide benefits in high-speed coatings or printing and spray coatings. When the dynamic surface tension is measured using a bubble tensiometer, DOWSIL™ 502W almost maintain its ST even at higher speeds. This gives an indication that DOWSIL™ 502W will be useful for wetting in high speed applications.
Figure 3: Dynamic Surface Tension values for DOWSIL™ additives versus competition as 0.2% by weight aqueous dispersions measured using a bubble tensiometer.

No Safety Data Sheets are available online for this material Please Contact Dow for additional information.
No Safety Data Sheets are available online for this material
Please Contact Dow for additional information.
No Food Contact Letters are available online for this material Please Contact Dow for additional information.
No Food Contact Letters are available online for this material
Please Contact Dow for additional information.
No sales specification could be found for this material in selected language
All products must have the same delivery date
All products must be in the same product family
All products must be purchased on the same order
All products must be shipped from the same plant
Quantity({{ajax.content.bundlePriceData.priceTable.qtyUnitSapName}}) | Unit Price({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
---|---|
{{price.fromQuantity}} + {{price.fromQuantity}} - {{price.toQuantity}} {{price.fromQuantity}} + | {{price.priceData.formattedValue}} |
Quantity({{ajax.content.bundlePriceData.priceTable.sapName}}) | Unit Price({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
1 + | {{ajax.content.bundlePriceData.priceTable.displayFlatPrice}} |