DOWSIL™ 3-4150 Dielectric Gel Kit
Properties
These values are typical properties and are not intended for use in preparing specifications.
- Cure Type Yes No Addition Cure
- Dielectric Strength Yes No 375 volts per mil v/mil
- Dissipation Factor at 100 Hz Yes No 0.002
- Dissipation Factor at 100 kHz Yes No 0.0001
- Gel Hardness Yes No 115 Grams/Penetration (1
- Number of Parts Yes No Two
- Resistance Type Yes No Thermal Resistance
- Room Temperature Cure - Hours Yes No 0.75 to 1.5 Hours
- Soft Gel Yes No true
- Soft Stress Relieving Yes No true
- Specific Gravity @ 25C Yes No 0.97
- Temperature Stable Yes No High, Low
Frequently Bought Together
-
DOWSIL™ 3145 RTV Mil-A-46146 Adhesive / Sealant
One-part, moisture RTV, non-flow, high strength, UL and Mil Spec.
-
DOWSIL™ 1-4173 Thermally Conductive Adhesive
One-part gray, flowable thermally conductive adhesive with high tensile strength.
-
DOWSIL™ TC-3015 Re-workable Thermal Gel
A one part, heat cure silicone based thermally conductive gel with good re-workability. It’s supplied as non-flowable paste and can be pressed lower to 100 um thickness in thermal management application. It can be cured to elastic pad with certain tensile strength and elongation which can make sure the material can be peeled off easily and completely without residue in rework process.
-
DOWSIL™ 7091 Adhesive Sealant
High performance, neutral cure silicone adhesive/sealant.
-
SYLGARD™ 184 Silicone Elastomer Kit
Two-part, clear, 10:1, RT and heat cure, good strength, UL and Mil Spec, same as SYLGARD™ 182 but with faster RT cure.
-
SYLGARD™ 527 A&B Silicone Dielectric Gel
A two-part, 1 to 1 mix ratio dielectric gel that is suitable for sealing and protecting various electronic devices, especially those with delicate components.
-
DOWSIL™ 1200 OS Primer
An air drying primer supplied as a dilute solution of moisture reactive materials in volatile siloxane and is used to improve both the quality and speed of adhesion development to room temperature vulcanizing silicone sealants to a variety of common non-porous substrates.
-
DOWSIL™ PR-1200 RTV Prime Coat
Clear, naptha based general purpose primer for use with all silicone elastomers & RTVs. It also promotes adhesion of certain one-part silicone sealants and coating to a variety of construction materials such as plywood, masonry and metal.
-
DOWSIL™ OS- 20
An ozone-safe volatile methylsiloxane (VMS) fluid developed specifically for use as a precision cleaning agent and carrier.
-
DOWSIL™ 3-1953 Conformal Coating
One-part, translucent, fast moisture RTV cure with mild heat acceleration possible, soft, stress-relieving, contains UV indicator.
No Safety Data Sheets are available online for this material Please Contact Dow for additional information.
No Safety Data Sheets are available online for this material
Please Contact Dow for additional information.
