DOWSIL™ 1-2620 Low VOC Conformal Coating
One-part, transparent low viscosity conformal coating with firm, abrasion resistant surface after cure. Low VOC version of 1-2620.
Properties
These values are typical properties and are not intended for use in preparing specifications.
- Curable Coating Yes No true
- Dielectric Constant at 100 Hz Yes No 2.49
- Dielectric Constant at 100 kHz Yes No 2.48
- Dielectric Strength Yes No 400 volts per mil v/mil
- Dielectric Strength (kV/mm) Yes No 16 kV/mm
- Durometer - Shore A Yes No 80 Shore A
- Flowable Yes No true
- Low Odor Yes No true
- Number of Parts Yes No One
- Resistance Type Yes No Abrasion Resistance
- Solvent Borne Yes No true
- Volume Resistivity Yes No 1.05e+015 ohm-centimeters
Frequently Bought Together
-
DOWSIL™ EA-4600 HM RTV Black UV
A moisture curing silicone adhesive formulated to have immediate green strength to offer assembly improvements. Products made with this adhesive can be immediately handled. As a viscoelastic material when cured and then exposed to high temperatures, this product will soften but recovers to its typical properties when cooled down.
-
DOWSIL™ 3-1953 Conformal Coating
One-part, translucent, fast moisture RTV cure with mild heat acceleration possible, soft, stress-relieving, contains UV indicator.
-
DOWSIL™ 732 Multi-Purpose Sealant
General-purpose acetoxy RTV sealant. Meets the requirements of 21 CFR Section 177.2600: "Rubber articles intended for repeated use".
-
DOWSIL™ 3-1944 RTV Coating
One-part, translucent, moisture RTV, moderate flow, fast tack-free, contains UV indicator, UL 746 and Mil Spec tested.
-
DOWSIL™ TC-4525 A/B
A thermally Conductive Gap Filler offers thermal conductivity of 2.5W/m.K. This is a soft and compressible silicone material designed to dissipate heat from electronic modules by conducting it to a heat sink such as an aluminum housing. Excellent fit for automotive electronics and battery packs applications.
-
DOWSIL™ VE-6001UV
One part, transparent, low modulus, low shrinkage, UV curable resin for liquid-based bonding technology, Designed to bond Display Cover Glass/Plastic and Touch Panel to LCD/OLED Display Module
-
DOWSIL™ 3-1965 Conformal Coating
One-part, clear, fast moisture RTV cure with mild heat acceleration possible, low viscosity, soft, stress-relieving, contains UV indicator.
-
XIAMETER™ PMX-200 Silicone Fluid 500,000 cSt
100% active, 500,000 cSt, polydimethylsiloxane polymer.
-
DOWSIL™ 1200 OS Primer
An air drying primer supplied as a dilute solution of moisture reactive materials in volatile siloxane and is used to improve both the quality and speed of adhesion development to room temperature vulcanizing silicone sealants to a variety of common non-porous substrates.
No Safety Data Sheets are available online for this material Please Contact Dow for additional information.
No Safety Data Sheets are available online for this material
Please Contact Dow for additional information.
