DOW™ NG6995 Medium Density Polyethylene Resin
MPDE NG 6995 is a Medium Density Polyethylene Resin produced in the Gas Phase technology. It is designed for blown film applications providing good processability and seal properties. It offers good tear and impact resistance. The main characteristics are: monolayer and multilayer blown film, and general purpose bags.
Properties
These values are typical properties and are not intended for use in preparing specifications.
- 2% Secant Modulus, MD (ASTM D882) in MPa (psi) Yes No 798 (116000)
- 2% Secant Modulus, TD (ASTM D882) in MPa (psi) Yes No 887 (129000)
- Anti-block Yes No false
- Density (ASTM D792) Yes No 0.939 g/cm3
- Impact Strength in MPa (psi) Yes No 76 J/m (1.4 ft-lb/in) - Notched Izod Impact (23˚C (73˚F))
- Melt Index (g/10min @190°C/2.16 kg) Yes No 0.38
- Melt Index (g/10min @190°C/5.0 kg) Yes No 0.38
- Slip Yes No false
- Tensile Elongation at Break, MD Yes No 310 %
- Tensile Elongation at Break, TD Yes No 610 %
- Tensile Strength Break, MD (ASTM D882) in MPa (psi) Yes No 34.8 (5050)
- Tensile Strength Break, TD (ASTM D882) in MPa (psi) Yes No 26.0 (3770)
- Tensile Strength Yield, MD (ASTM D882) in MPa (psi) Yes No 16.0 (2330)
- Tensile Strength Yield, TD (ASTM D882) in MPa (psi) Yes No 18.0 (2610)
No Safety Data Sheets are available online for this material Please Contact Dow for additional information.
No Safety Data Sheets are available online for this material
Please Contact Dow for additional information.
