CONTINUUM™ DMDC-1270 NT 7 Bimodal Polyethylene Resins
High density polyethylene resin with excellent stiffness, impact strength, and stress crack resistance used in compression and injection molded closure applications such as carbonated soft drinks.
Properties
These values are typical properties and are not intended for use in preparing specifications.
- 2% Secant Modulus, MD (ASTM D882) in MPa (psi) Yes No 1030 (150000)
- 2% Secant Modulus, TD (ASTM D882) in MPa (psi) Yes No 1030 (150000)
- Anti-block Yes No No
- Closure Type Yes No Caps, Carbonated Beverages, Hot Fill / Aseptic, Still Water
- Density (ASTM D792) Yes No 0.955 g/cm3
- Density Range Yes No .951-.960
- ESCR-Environmental Stress Crack Resistance (10% IGEPAL) Yes No 100 hr
- ESCR-Environmental Stress Crack Resistance (100% IGEPAL) Yes No > 1000 hr
- Functionality Yes No Mechanical Performance
- Melt Index (g/10min @190°C/2.16 kg) (ASTM D1238) Yes No 2.5
- Process Yes No Compression Molding, Injection Molding
- Slip Yes No Yes
- Tensile Elongation at Break, MD Yes No 920 %
- Tensile Elongation at Break, TD Yes No 920 %
- Tensile Strength Break, MD (ASTM D638) in MPa (psi) Yes No 26 (3770)
- Tensile Strength Break, TD (ASTM D638) in MPa (psi) Yes No 26 (3770)
- Tensile Strength Yield, MD (ASTM D638) in MPa (psi) Yes No 27 (3920)
- Tensile Strength Yield, TD (ASTM D638) in MPa (psi) Yes No 27 (3920)
No Safety Data Sheets are available online for this material Please Contact Dow for additional information.
No Safety Data Sheets are available online for this material
Please Contact Dow for additional information.
No sales specification could be found for this material in selected language
The following Rules apply:
All products must have the same delivery date
All products must be in the same product family
All products must be purchased on the same order
All products must be shipped from the same plant
All products must have the same delivery date
All products must be in the same product family
All products must be purchased on the same order
All products must be shipped from the same plant
| Quantity({{ajax.content.bundlePriceData.priceTable.qtyUnitSapName}}) | Unit Price({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
|---|---|
| {{price.fromQuantity}} + {{price.fromQuantity}} - {{price.toQuantity}} {{price.fromQuantity}} + | {{price.priceData.formattedValue}} |
| Quantity({{ajax.content.bundlePriceData.priceTable.sapName}})/> | Unit Price({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}})/> |
| 1 + | {{ajax.content.bundlePriceData.priceTable.displayFlatPrice}} |
{{conversions}}
