ACRYSOL™ DR-130 Rheology Modifier
Based on acrylic chemistry. It is highly cost effective and is suggested for use in higher PVC waterborne coating formulations, including putties, flat and silk paints. Designed as an alternative to cellulose ether thickeners in several key areas including coating application and feel properties as well as paint viscosity retention upon water dilution. It is particularly well adapted to latex paints which are diluted with water by applicators.
Uses:
- Interior and exterior paints
- Wide range of sheen through high gloss paints, including low-VOC formulations
- Water-based architectural and industrial coatings
- Utility with all binder types
- Additive Applications
- Exterior Insulation Finish Systems (EIFS)
- Paint/coatings
- Paper
- Textiles
- Paper processing and finishing
- Building and Construction
- Nonwoven binders
- General industrial finishes
- Art conservation applications
- Water-based industrial baking enamels
Benefits:
- Broad formulation latitude
- Ease of handling
- Use over a wide pH range
- Reduced levels required for comparable rheology
- Improved gloss development versus HEC
- Most offerings ideal for low VOC formulations
- Product offerings across different sheer ranges
- Excellent spatter resistance
- Broad latex compatibility
Properties
These values are typical properties and are not intended for use in preparing specifications.
- % Solids 30 %
- ICI Efficiency Good
- KU Efficiency Better
- pH 4.2
- Recommended Binder Chemistry 100% Acrylic, Styrene Acrylic, Styrene Butadiene, Vinyl Acetate, Vinyl Acrylic, Vinyl Acrylic Ethylene (VAE)
No Safety Data Sheets are available online for this material Please Contact Dow for additional information.
No Safety Data Sheets are available online for this material
Please Contact Dow for additional information.
