EVERCAP™ DMDA-1260 NT 7 Innovative Closure Resin
Uses:
- Beverage packaging
- Food packaging
- Aseptic packaging
- Hot fill packaging
Benefits:
- Great balance of stiffness, toughness and ESCR for beverage closures
- Maintains specified application and removal torques of beverage closures that use aseptic processes without use of slip agents
- Mainatins excellent organoleptics
Properties
These values are not intended for use in preparing specifications.
Typical Properties
- 2% Secant Modulus, MD (ASTM D882) in MPa (psi) Yes No 1410 (204000)
- 2% Secant Modulus, TD (ASTM D882) in MPa (psi) Yes No 1410 (204000)
- Anti-block Yes No No
- Closure Type Yes No Caps, Hot Fill / Aseptic
- Density (ASTM D792) Yes No 0.965 g/cm3
- Density Range Yes No .961+
- ESCR-Environmental Stress Crack Resistance (10% IGEPAL) Yes No 28 hr
- ESCR-Environmental Stress Crack Resistance (100% IGEPAL) Yes No 35 hr
- Functionality Yes No Mechanical Performance
- Melt Index (g/10min @190°C/2.16 kg) (ASTM D1238) Yes No 2.7
- Process Yes No Compression Molding, Injection Molding
- Slip Yes No No
- Tensile Elongation at Break, MD Yes No 700 %
- Tensile Elongation at Break, TD Yes No 700 %
- Tensile Strength Break, MD (ASTM D638) in MPa (psi) Yes No 20.7 (3000)
- Tensile Strength Break, TD (ASTM D638) in MPa (psi) Yes No 20.7 (3000)
- Tensile Strength Yield, MD (ASTM D638) in MPa (psi) Yes No 29.6 (4300)
- Tensile Strength Yield, TD (ASTM D638) in MPa (psi) Yes No 29.6 (4300)
EVERCAP™ DMDA-1260 NT 7 High Density Polyethylene Resin (HDPE) enables the right performance properties to meet demanding closure and fitment application needs. It is intended for use in compression and injection molded one piece beverage closures designed primarily for applications that undergo hot fill or aseptic sterilization processes. EVERCAP™ DMDA-1260 NT 7 High Density Polyethylene Resin delivers a combination of improved properties such as improved stiffness, higher heat deflection temperature, improved ESCR, gaseous barrier, and easy processing versus alternative HDPE systems typically used for hot fill and aseptic sterilization processes. The end result is the ability to light weight closures that are easy opening without the use of slip agents for aseptic applications where an acid wash can remove the slip agent and potentially plug wash water filters.
No Safety Data Sheets are available online for this material Please Contact Dow for additional information.
No Safety Data Sheets are available online for this material
Please Contact Dow for additional information.
No Food Contact Letters are available online for this material Please Contact Dow for additional information.
No Food Contact Letters are available online for this material
Please Contact Dow for additional information.
No sales specification could be found for this material in selected language
All products must have the same delivery date
All products must be in the same product family
All products must be purchased on the same order
All products must be shipped from the same plant
Quantity({{ajax.content.bundlePriceData.priceTable.qtyUnitSapName}}) | Unit Price({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
---|---|
{{price.fromQuantity}} + {{price.fromQuantity}} - {{price.toQuantity}} {{price.fromQuantity}} + | {{price.priceData.formattedValue}} |
Quantity({{ajax.content.bundlePriceData.priceTable.sapName}}) | Unit Price({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
1 + | {{ajax.content.bundlePriceData.priceTable.displayFlatPrice}} |