SILASTIC™ LTC 9400-50 Liquid Silicone Rubber
A low temperature curing injection-molding elastomer. It belongs to the SILASTIC™ LTC 9400 Series, developed to enable low temperature curing in a wide range of typical silicone rubber applications.
- Consumer goods articles
- Grommets, gaskets and seals
- Co-molding of low-melting plastics
- Overmolding of sensitive components
- Low temperature curing
- Fast deep-section cure at elevated temperatures
- Distinct rheology
- Improved flowability
- Excellent process performance facilitates short cycle times
- Food contact: Formulated to meet requirements of BfR XV recommendation and of FDA 21 CFR 177.2600
- Elongation はい いいえ 460 %
- Specific Gravity はい いいえ 1.11
- Viscosity - Part A はい いいえ 160 Pa.s
- Viscosity - Part B はい いいえ 160 Pa.s
DOWSIL™ EA-4700 CV Adhesive
A two-part, room temperature cure adhesive enabling assembly production savings due to a fast cure at room temperature.
DOWSIL™ ES-5300 Formulation Aid
A non diluted silicone surfactant with higher oil phase flexibility. Designed to produce stable water-in-silicone emulsions and water-in-oil emulsions with light sensory. INCI Name: Lauryl PEG-10 Tris(Trimethylsiloxy)silylethyl Dimethicone
DOWSIL™ VM-2270 Aerogel Fine Particles
A white free-flowing powder that is 100 percent hydrophobic for use in hair care, skincare, fragrance delivery, and antiperspirants / deodorants. INCI Name: Silica Silylate
SILASTIC™ MS-1002 Moldable Silicone A&B Kit
A medium viscosity, high Shore A hardness, two-part, 1 to 1 ratio, fast curing optical molding resin for producing fine detail with good resistance to environmental aging.
XIAMETER™ PMX-200 Silicone Fluid .65 cSt
A volatile siloxane fluid (hexamethyldisiloxane). INCI Name: Disiloxane
DOWSIL™ 8590 Additive
A silicone foam control agent for waterborne coatings. It shows excellent defoaming performance in waterborne coatings and ink systems and has a low tendency to cause surface defects.
DOWSIL™ TC-4525 CV Thermally Conductive Gap Filler
A soft and compressible material once cured, designed to dissipate the heat from electronics mounted on printed circuit board to heat sink providing a reliable cooling solution for modules like an engine or transmission control unit.
XIAMETER™ PMX-200 Silicone Fluid 2 cSt
A polydimethylsiloxane polymer for use in skincare, suncare, hair care, and color cosmetic applications. INCI Name: Dimethicone
DOWSIL™ 52 Additive
Improves mar resistance and slip in water-borne systems
DOWSIL™ 7091 Adhesive Sealant
High performance, neutral cure silicone adhesive/sealant.