物性
製品の使用と処方 |
|
|---|---|
| Cure System | 2-Part Cure |
| Number of Parts | Two |
| Where Used | Factory |
| Working Time | 5 to 10 Minutes |
代表的な物性 |
|
|---|---|
| Adhesion to | Alodine Aluminum, Anodized Aluminum, Enamelled and Reflective Glass, Fluorocarbon Coated Aluminum, Glass, Heat Strengthened Glass, Polyester Powder Coated Aluminum/Steel, Stainless Steel |
| Appearance | Opaque |
| Chemistry | Neutral |
| Durometer - Shore D | 35 Shore D |
| Elongation | 180 % |
| Modulus @ 150% Elongation, maximum | 52 psi |
| Movement | Low |
| Substrate | Non-porous |
| Tensile Strength | 188 psi |