DOWSIL™ OR-2000 Standard Hard Gel Parts A&B

とは DOWSIL™ OR-2000 Standard Hard Gel Parts A&B?

Two-part, translucent, 1:1 mix ratio, fast room temperature cure hard gel intended use in potting printed circuit board (PCB) system assemblies. DOWSIL™ OR-2000 Standard Hard Gel Parts A&B is a low viscosity, hard gel with fast room temperature cure.

用途

Encapsulation
Stress relief
Mechanical protection
Electrical insulation
Environmental protection

利点

Two-part, 1:1 mix ratio
Translucent
Heat cure: 90 min @ 25°C, 10 min @ 50°C, 5 min @ 75°C
Viscosity: 425 cps
Hardness: 62 Shore 00
Hardened gel for additional mechanical strength
UL 94 V-1

物性

認証と規格
Regulatory Approvals	UL Recognized

製品の使用と処方
Number of Parts	Two Part
Room Temperature Cure	90 Hours
Working Time at 25°C	10 Minutes

代表的な物性
Color	Translucent
Cure Type	Heat Cure, Room Temperature Cure
Dielectric Strength	420 volts per mil v/mil
Durometer - Shore 00	62
Heat Cure	10 min @ 50°C, 5 min @ 75°C, 3 min @ 100°C
Opacity	Translucent
Specific Gravity @ 25°C	0.97
Thermal Conductivity	0.15 W/m・K
Viscosity	425 mPa.s

DOWSIL™ OR-2000 Standard Hard Gel Parts A&B

とは DOWSIL™ OR-2000 Standard Hard Gel Parts A&B?

用途

利点

物性

認証と規格

製品の使用と処方

代表的な物性

リソース

トレーニング/学び

コーポレートサイト

法令遵守