DOW™ DMDA-8940 NT 7 High Density Polyethylene Resin
This product is used in injection molding for molded housewares, toys, food containers and pails. Offers excellent balance of toughness, stress crack resistance and processability and has very narrow molecular weight distribution.
物性
これらの値は一般特性を表すもので、規格ではありません。
- 2% Secant Modulus, MD (ASTM D882) in MPa (psi) 1020 (148000)
- 2% Secant Modulus, TD (ASTM D882) in MPa (psi) 1020 (148000)
- Anti-block false
- Brittleness Temperature in °C(°F) -72.2
- Density (ASTM D792) 0.951 g/cm3
- Impact Strength in MPa (psi) 84.1 kJ/m2 (40 ft lb/in2) ASTM D1822
- Melt Index (g/10min @190°C/21.6 kg) 44 g/10minutes
- Slip false
- Tensile Elongation at Break, MD 10 %
- Tensile Elongation at Break, TD 10 %
- Tensile Strength Break, MD (ASTM D638) in MPa (psi) 26.9 (3900)
- Tensile Strength Break, TD (ASTM D638) in MPa (psi) 26.9 (3900)
- Tensile Strength Yield, MD (ASTM D638) in MPa (psi) 26.9 (3900)
- Tensile Strength Yield, TD (ASTM D638) in MPa (psi) 26.9 (3900)
この製品の有効な安全データシート(SDS)がありません 詳細については当社にお問い合わせください。
この製品の有効な安全データシート(SDS)がありません
詳細については当社にお問い合わせください。
