DOWSIL™ SE 4445 CV Kit

概要
サンプルオプション
購入オプション
技術的なコンテンツ

Two-part, grey, 1:1, addition cure gel, good thermal conductivity, controlled volatility, UL 94 V-0.

物性

これらの値は一般特性を表すもので、規格ではありません。

Adhesion to はいいいえ金属, アルミニウム, プラスチック, FR4, セラミックの
Color はいいいえグレー
Cure Type はいいいえ付加型硬化
Dielectric Constant at 1MHz はいいいえ 6.2
Dielectric Strength はいいいえ 127 volts per mil v/mil
Dynamic Viscosity はいいいえ 15025 Centipoise
Flowable はいいいえ true
Heat Cure はいいいえ 45 Minutes @ 125 Deg C
Hydrophobic はいいいえ true
Low Odor はいいいえ true
Number of Parts はいいいえ 2
Polyesters はいいいえ true
Primerless Adhesion はいいいえプライマーレス
Resistance Type はいいいえ耐酸化性, 耐オゾン性, 耐溶剤性, 熱抵抗, UV抵抗, 耐水性
Self Leveling はいいいえ true
Shelf Life はいいいえ 183 Days
Specific Gravity @ 25C はいいいえ 2.36
Temperature Range はいいいえ -45 to 150 °C
Temperature Stable はいいいえ高（黄変しにくい）, 低
Thermal Conductivity はいいいえ 1.34 Watts per meter K
Volume Resistivity はいいいえ 7e+015 ohm-centimeters
Water Resistant はいいいえ true
Worked Penetration はいいいえ 50 mm/10
Working Time はいいいえ 300 Minutes

DOWSIL™ OS- 20
An ozone-safe volatile methylsiloxane (VMS) fluid developed specifically for use as a precision cleaning agent and carrier.

DOWSIL™ EA-6060 Adhesive A&B
A two-part, non-flowing silicone adhesive enabling assembly production savings due to a fast cure at moderate temperature.

DOWSIL™ Q1-9226 Thermally Conductive Adhesive
Typical applications include bonding organic and ceramic substrates to heat sinks for electronic control modules in automotive applications. It is a two-part, gray, 1:1 mix ratio, heat cure, moderate flow, self-priming, thermally conductive adhesive.

DOWSIL™ SE 9168 RTV
One-part, grey, moisture cure RTV, non-flowing, fast tack-free, controlled volatility, UL V-0, controlled volatility-reducing the potential of volatiles affecting surrounding components.

DOWSIL™ 3-6265 HP Adhesive
High performance version of 3-6265 adhesive, especially minimizing voids.

DOWSIL™ 3-1965 Conformal Coating
One-part, clear, fast moisture RTV cure with mild heat acceleration possible, low viscosity, soft, stress-relieving, contains UV indicator.

DOWSIL™ 7091 Adhesive Sealant
High performance, neutral cure silicone adhesive/sealant.

DOWSIL™ 1-2577 Low VOC Conformal Coating
One-part, clear, RTV cure with mild heat acceleration possible, hard slick finish with abrasion resistance, solvent-borne (VOC exempt in many areas), UL and Mil Spec, contains UV indicator.

DOWSIL™ TC-2035 Adhesive A/B Kit
Two-part heat cure silicone highly thermally conductive adhesive with low bond line thickness.

DOWSIL™ EI-1184 Optical Encapsulant
A 1:1 mix ratio, fast curing, 2-part silicone encapsulant suitable for encapsulating rigid and flexible circuit boards indoor and outdoor LED Lighting applications.