DOWSIL™ EG-4234 Dielectric Tough Gel Kit

Two-part, translucent blue, 1 to 1 mix ratio, fast heat cure tough gel with UV indicator, conditional primerless adhesion. Gel is suitable for sealing and protecting various PCB system assemblies, especially those requiring primerless adhesion.
  • DOWSIL™ 1-2577 Low VOC Conformal Coating
    One-part, clear, RTV cure with mild heat acceleration possible, hard slick finish with abrasion resistance, solvent-borne (VOC exempt in many areas), UL and Mil Spec, contains UV indicator.

  • DOWSIL™ 3-6265 Thixotropic Adhesive
    One-part, black, heat cure, high strength, self-priming, contains UV indicator, non-flowing version of 3-6611. Suitable for use in automotive and industrial assembly areas including sealing lids and housings, attaching base plates gasket, and connector sealing.

  • DOWSIL™ 340 Heat Sink Compound
    White, non-flowing, highly filled compound, good thermal conductivity.

  • DOWSIL™ TC-4525 A/B

    A thermally Conductive Gap Filler offers thermal conductivity of 2.5W/m.K. This is a soft and compressible silicone material designed to dissipate heat from electronic modules by conducting it to a heat sink such as an aluminum housing. Excellent fit for automotive electronics and battery packs applications.

  • DOWSIL™ 1200 OS Primer
    An air drying primer supplied as a dilute solution of moisture reactive materials in volatile siloxane and is used to improve both the quality and speed of adhesion development to room temperature vulcanizing silicone sealants to a variety of common non-porous substrates.

  • DOWSIL™ 3-1953 Conformal Coating
    One-part, translucent, fast moisture RTV cure with mild heat acceleration possible, soft, stress-relieving, contains UV indicator.

  • SILASTIC™ RBL-9694-30P A&B Liquid Silicone Rubber
    A two-part, nonslumping, heat-cure liquid silicone rubber elastomer designed to be easily mixed, dispensed, and cured directly on automotive and other industrial components to form a compression gasket.

  • DOWSIL™ 1-4174 Thermally Conductive Adhesive
    One-part, grey, heat cure, thermally conductive, low flow, same as 1-4173 with 7 mil (178 micron) spacer beads, self-priming.

  • DOWSIL™ EA-7100 Adhesive

    A one-part, thixotropic non-flowing adhesive, enabling design flexibility due to strong adhesion to a broad range of substrates.

  • DOWSIL™ X3-1598 Adhesive
    One-part, black, heat cure, moderate flow, high strength, self-priming, similar to Q3-6611 with UV indicator.



DOWSIL™ EG-4234 Dielectric Tough Gel Kit

DOWSIL™ EG-4234 Dielectric Tough Gel Kit


DOWSIL™ EG-4234 Dielectric Tough Gel Kit
この製品で利用可能な代理店オプションについて お問い合わせください