[{"values":[{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"JP","default":"ja-jp"},{"values":[{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"CN","default":"zh-cn"},{"values":[{"value":"日本語","languageCode":"ja-jp","link":"javascript:void(0);"},{"value":"中文-中国語(簡体字","languageCode":"zh-cn","link":"javascript:void(0);"},{"value":"English-英語","languageCode":"en-us","link":"javascript:void(0);"}],"label":"US","default":"en-us"}]

DOW™ 640I Low Density Polyethylene Resin

A Low Density Polyethylene (LDPE), barefoot general purpose liner resin for thin gauge applications requiring good drawdown and excellent toughness.

用途:

  • Hygiene films (backsheet)
  • Blown and cast film extrusion

利点:

  • Fast conversion speed
  • Low gauges
  • Provides good bubble stability in backsheet production
  • Provides draw resonace stability in backsheet production
  • Optimum gauge range: 0.8-3.0 mil

物性

これらの値は一般特性を表すもので、規格ではありません。

  • 2% Secant Modulus, MD (ASTM D882) in MPa (psi) はい いいえ Blown Film - 181 (26200)
  • 2% Secant Modulus, TD (ASTM D882) in MPa (psi) はい いいえ Blown Film - 207 (30000)
  • Dart Drop Impact (ASTM D1709A) in grams (lbs) はい いいえ Blown Film - 150 g
  • Density (ASTM D792) はい いいえ 0.92 g/cm3
  • Elmendorf Tear Strength, MD (ASTM D1922) in grams (lbs) はい いいえ Blown Film 2 mil - 500 g
  • Elmendorf Tear Strength, TD (ASTM D1922) in grams (lbs) はい いいえ Blown Film 2 mil - 280 g
  • Gloss (45 degree) はい いいえ 75 %
  • Haze (ASTM D1003) はい いいえ Blown Film 2 mil - 7.6 %
  • Melt Index (g/10min @190°C/21.6 kg) はい いいえ 2
  • Melting Point, DSC (Dow Method) in °C(°F) はい いいえ 112°C (233°F)
  • Puncture Resistance (Dow Method) in joules/cm3 (lbs/in3) はい いいえ Blown Film 2 mil - 2.9 J/cm3 (35 ft lb/in3)
  • Tensile Elongation at Break, MD はい いいえ Blown Film 2 mil - 420 %
  • Tensile Elongation at Break, TD はい いいえ Blown Film 2 mil - 670 %
  • Tensile Strength Break, MD (ASTM D882) in MPa (psi) はい いいえ Blown Film 2 mil - 24.8 (3600)
  • Tensile Strength Break, TD (ASTM D882) in MPa (psi) はい いいえ Blown Film 2 mil - 23 (3330)
  • Tensile Strength Yield, MD (ASTM D882) in MPa (psi) はい いいえ Blown Film 2 mil - 12.3 (1790)
  • Tensile Strength Yield, TD (ASTM D882) in MPa (psi) はい いいえ Blown Film 2 mil - 12.1 (1760)
  • Vicat Softening Point in °C(°F) はい いいえ 95°C (203°F)

この製品の有効な安全データシート(SDS)がありません
詳細については当社にお問い合わせください

選択された言語での当該製品の販売規格は見つかりません

DOW™ 640I Low Density Polyethylene Resin
この製品にはテクニカルデータシートはございません
詳細については当社にお問い合わせください

DOW™ 640I Low Density Polyethylene Resin


この製品に関する規制データシートはございません


DOW™ 640I Low Density Polyethylene Resin
この製品で利用可能な代理店オプションについて お問い合わせください