RESILITY™ DPDB-3152 NT 7 Medium Density Polyethylene Resin
Produced via the UNIPOL™ Process & intended for rotational & injection molding. Designed for applications requiring excellent processability & aesthetics.
사용:
- Rotational Molding
- Injection Molding
- Intermediate Bulk Containers
- Toys
- General Purpose Custom Molding
- Agricultural Storage Tanks
- Water Tanks
- Marine Parts
- Indoor Consumer Articles
혜택:
- Excellent Impact Strength
- Stress Crack Resistance
- Good Processability
- Long UV Stabilization
속성
*이 값은 일반적인 속성이며 제품 사양에는 사용되지 않습니다.
물리적 특성
- ESCR-Environmental Stress Crack Resistance (100% IGEPAL) 예 No >1000 - F50
- Tensile Strength Yield, MD (ASTM D882) in MPa (psi) 예 No 18.8 (2730)
- 구조 유형 예 No Monolayer, 멀티레이어
- 기능 예 No Mechanical Performance
- 밀도 (ASTM D792) 예 No 0.935 g/cm3
- 슬립 예 No 아니오
- 안티 블록 예 No 아니오
- 용융 지수 (g/10min @190°C/2.16 kg) 예 No 5.2
- 프로세스 예 No Injection Molding, Rotational Molding
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음 자세한 내용은 Dow에 문의 하십시오.
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음
자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material 자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material
자세한 내용은 Dow에 문의 하십시오.
선택한 언어로 작성된 자재 판매 사양 찾지 못함
모든 제품은 동일한 배송일로 주문하여야 합니다.
모든 제품은 동일한 제품군에 있어야합니다.
모든 제품은 동일한 주문으로 구매해야합니다.
모든 제품은 동일한 플랜트에서 출하해야합니다.
수량({{ajax.content.bundlePriceData.priceTable.qtyUnitSapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
---|---|
{{price.fromQuantity}} + {{price.fromQuantity}} - {{price.toQuantity}} {{price.fromQuantity}} + | {{price.priceData.formattedValue}} |
수량({{ajax.content.bundlePriceData.priceTable.sapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
1 + | {{ajax.content.bundlePriceData.priceTable.displayFlatPrice}} |