FINGERPRINT™ DFDA-7510 NT Polyethylene Resin
It is produced using UNIPOL™ process technology. It is intended for use in micro irrigation tube, durable hose and tube, profile extrusion, and injection molded fittings applications. It also has utility as a blending component to modify and improve the physical properties of high pressure, very low density, linear low density, or high density polyethylene resins. Outdoor applications require the addition of UV stabilizer to maintain the excellent properties over extended periods of UV exposure.
속성
*이 값은 일반적인 속성이며 제품 사양에는 사용되지 않습니다.
물리적 특성
- 강화 LLDPE Yes No 아니오
- 밀도 (ASTM D792) Yes No 0.92 g/cm3
- 슬립 Yes No 아니오
- 안티 블록 Yes No 아니오
- 용융 지수 (g/10min @190°C/2.16 kg) Yes No 0.6
- 프로세스 Yes No Injection Molding
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음 자세한 내용은 Dow에 문의 하십시오.
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음
자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material 자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material
자세한 내용은 Dow에 문의 하십시오.
선택한 언어로 작성된 자재 판매 사양 찾지 못함
모든 제품은 동일한 배송일로 주문하여야 합니다.
모든 제품은 동일한 제품군에 있어야합니다.
모든 제품은 동일한 주문으로 구매해야합니다.
모든 제품은 동일한 플랜트에서 출하해야합니다.
수량({{ajax.content.bundlePriceData.priceTable.qtyUnitSapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
---|---|
{{price.fromQuantity}} + {{price.fromQuantity}} - {{price.toQuantity}} {{price.fromQuantity}} + | {{price.priceData.formattedValue}} |
수량({{ajax.content.bundlePriceData.priceTable.sapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
1 + | {{ajax.content.bundlePriceData.priceTable.displayFlatPrice}} |