EVERCAP™ DMDD-1210 NT 7 Innovative Closure Resin
사용:
- Flat water beverage
- Isotonic beverages
- Food packaging
혜택:
- Stiffness toughness
- Stress-crack resistance processability
- Organoleptic
속성
*이 값은 일반적인 속성이며 제품 사양에는 사용되지 않습니다.
물리적 특성
- 2% Secant Modulus, MD (ASTM D882) in MPa (psi) Yes No 1050 (152000)
- 2% Secant Modulus, TD (ASTM D882) in MPa (psi) Yes No 1050 (152000)
- ESCR-Environmental Stress Crack Resistance (10% IGEPAL) Yes No 12 hr
- ESCR-Environmental Stress Crack Resistance (100% IGEPAL) Yes No 22 hr
- Tensile Strength Break, MD (ASTM D638) in MPa (psi) Yes No 20.5 (2970)
- Tensile Strength Break, TD (ASTM D638) in MPa (psi) Yes No 20.5 (2970)
- Tensile Strength Yield, MD (ASTM D638) in MPa (psi) Yes No 27.3 (3960)
- Tensile Strength Yield, TD (ASTM D638) in MPa (psi) Yes No 27.3 (3960)
- 기능 Yes No Mechanical Performance
- 밀도 (ASTM D792) Yes No 0.952 g/cm3
- 밀도 범위 Yes No .951-.960
- 슬립 Yes No 예
- 안티 블록 Yes No 아니오
- 용융 지수 (g/10min @190°C/2.16 kg) Yes No 10
- 절단 신율, MD Yes No 1500 %
- 절단 신율, TD Yes No 1500 %
- 폐쇄 유형 Yes No Caps, Hot Fill / Aseptic, Still Water
- 프로세스 Yes No Injection Molding, 압축 몰딩
EVERCAP™ DMDD-1210 NT 7 High Density Polyethylene Resin enables the right performance properties to meet demanding closure and fitment application needs. It is intended for use in both compression and injection molded closure applications. This resin has been designed to meet demanding performance requirements, especially in the areas of stiffness, impact strength, and sensory, while maintaining good processing characteristics beneficial to molders. Typical applications include injection molded closures for water, juice, dairy, and sports drinks, including hot fill and aseptic bottling applications, where minimizing the contribution of the package to the taste of the product and use of slip is a requirement.
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음 자세한 내용은 Dow에 문의 하십시오.
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음
자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material 자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material
자세한 내용은 Dow에 문의 하십시오.
선택한 언어로 작성된 자재 판매 사양 찾지 못함
모든 제품은 동일한 배송일로 주문하여야 합니다.
모든 제품은 동일한 제품군에 있어야합니다.
모든 제품은 동일한 주문으로 구매해야합니다.
모든 제품은 동일한 플랜트에서 출하해야합니다.
수량({{ajax.content.bundlePriceData.priceTable.qtyUnitSapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
---|---|
{{price.fromQuantity}} + {{price.fromQuantity}} - {{price.toQuantity}} {{price.fromQuantity}} + | {{price.priceData.formattedValue}} |
수량({{ajax.content.bundlePriceData.priceTable.sapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
1 + | {{ajax.content.bundlePriceData.priceTable.displayFlatPrice}} |