ELITE™ 5811 Enhanced Polyethylene Resin
An extrusion coating resin. Main Characteristics are suitable for processing on conventional hardware, extrusion coating resin, low neck-in, good heat resistance, enhanced water vapor barrier, extra toughness and as a high performance sealant.
속성
*이 값은 일반적인 속성이며 제품 사양에는 사용되지 않습니다.
물리적 특성
- Elmendorf Tear Strength, MD (ASTM D1922) in grams (lbs) 예 No .54 lb (ISO 6383-2)
- Elmendorf Tear Strength, TD (ASTM D1922) in grams (lbs) 예 No .86 lb (ISO 6383-2)
- Heat Seal Initiation Temp in °C(°F) 예 No 98 (208)
- Vicat Softening Point in °C(°F) 예 No 102 (216)
- 강화 LLDPE 예 No 예
- 기능 예 No Mechanical Performance
- 녹는 점, DSC (Dow Method) in °C(°F) 예 No 124 (255)
- 밀도 (ASTM D792) 예 No 0.919 g/cm3
- 슬립 예 No 아니오
- 안티 블록 예 No 아니오
- 용융 지수 (g/10min @190°C/2.16 kg) 예 No 8
- 프로세스 예 No Extrusion Coating and Lamination
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음 자세한 내용은 Dow에 문의 하십시오.
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음
자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material 자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material
자세한 내용은 Dow에 문의 하십시오.
선택한 언어로 작성된 자재 판매 사양 찾지 못함
모든 제품은 동일한 배송일로 주문하여야 합니다.
모든 제품은 동일한 제품군에 있어야합니다.
모든 제품은 동일한 주문으로 구매해야합니다.
모든 제품은 동일한 플랜트에서 출하해야합니다.
수량({{ajax.content.bundlePriceData.priceTable.qtyUnitSapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
---|---|
{{price.fromQuantity}} + {{price.fromQuantity}} - {{price.toQuantity}} {{price.fromQuantity}} + | {{price.priceData.formattedValue}} |
수량({{ajax.content.bundlePriceData.priceTable.sapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
1 + | {{ajax.content.bundlePriceData.priceTable.displayFlatPrice}} |