DOW™ LDPE 582E Low Density Polyethylene Resin
This product can be readily extruded using conventional blown film techniques utilising melt temperatures between 150 and 170°C. This product, when properly fabricated, shows good mechanical properties and high optical properties. It shows very good drawdown properties and excellent processability. This product contains slip and antiblock additives. Regulations: DOW LDPE 582E Polyethylene Resin should comply with: - U.S. FDA 21 CFR 177.1520(c) 2.2 - EU, No 10/2011 - U.S. FDA-DMF - Consult the regulations for complete details. Applications: - Light produce bags. - Soft goods packaging. - Textile packaging. - High clarity applications.
속성
*이 값은 일반적인 속성이며 제품 사양에는 사용되지 않습니다.
물리적 특성
- 2% Secant Modulus, MD (ASTM D882) in MPa (psi) 예 No 190 (27600)
- 2% Secant Modulus, TD (ASTM D882) in MPa (psi) 예 No 175 (25400)
- Dart Drop Impact (ASTM D1709A) in grams (lbs) 예 No 120 g (ISO 7765-1a-/A)
- Elmendorf Tear Strength, MD (ASTM D1922) in grams (lbs) 예 No 500 g
- Elmendorf Tear Strength, TD (ASTM D1922) in grams (lbs) 예 No 400 g
- Tensile Strength Break, MD (ASTM D882) in MPa (psi) 예 No 17 (2470)
- Tensile Strength Break, TD (ASTM D882) in MPa (psi) 예 No 15 (2180)
- Tensile Strength Yield, MD (ASTM D882) in MPa (psi) 예 No 9 (1310)
- Tensile Strength Yield, TD (ASTM D882) in MPa (psi) 예 No 9 (1310)
- Vicat Softening Point in °C(°F) 예 No 93 (199)
- 광택 (45 degree) 예 No 70 %
- 기능 예 No Processing, 광학 성능
- 밀도 (ASTM D792) 예 No 0.923 g/cm3
- 슬립 예 No 예
- 안티 블록 예 No 예
- 용융 지수 (g/10min @190°C/2.16 kg) 예 No 3.5
- 용융 지수 (g/10min @190°C/21.6 kg) 예 No 3.5
- 절단 신율, MD 예 No 450 %
- 절단 신율, TD 예 No 650 %
- 프로세스 예 No Blown 필름 압출
- 흐릿해짐 (ASTM D1003) 예 No 7 %
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음 자세한 내용은 Dow에 문의 하십시오.
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음
자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material 자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material
자세한 내용은 Dow에 문의 하십시오.
선택한 언어로 작성된 자재 판매 사양 찾지 못함
모든 제품은 동일한 배송일로 주문하여야 합니다.
모든 제품은 동일한 제품군에 있어야합니다.
모든 제품은 동일한 주문으로 구매해야합니다.
모든 제품은 동일한 플랜트에서 출하해야합니다.
수량({{ajax.content.bundlePriceData.priceTable.qtyUnitSapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
---|---|
{{price.fromQuantity}} + {{price.fromQuantity}} - {{price.toQuantity}} {{price.fromQuantity}} + | {{price.priceData.formattedValue}} |
수량({{ajax.content.bundlePriceData.priceTable.sapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
1 + | {{ajax.content.bundlePriceData.priceTable.displayFlatPrice}} |