DOW™ LDPE 450E Low Density Polyethylene Resin
This product has been designed with an optimum balance of melt strength and drawability to give excellent performance in cast film, foam, blown film and bubble film extrusion. When properly fabricated, the product displays: excellent processability low neck-down (cast film) very good toughness and impact properties and good tear strength. In foam extrusion, This product gives an ideal balance between cell growth and stabilization to allow the production of very low density products without voids. Main Characteristics: - Cast film - Foam - Bubble film - General purpose blown film. Slip Additive: None Antiblock Additive: None
속성
*이 값은 일반적인 속성이며 제품 사양에는 사용되지 않습니다.
물리적 특성
- Dart Drop Impact (ASTM D1709A) in grams (lbs) Yes No 110 g
- Elmendorf Tear Strength, MD (ASTM D1922) in grams (lbs) Yes No 430 g
- Elmendorf Tear Strength, TD (ASTM D1922) in grams (lbs) Yes No 370 g
- Tensile Strength Break, MD (ASTM D882) in MPa (psi) Yes No 20.9 (3030)
- Tensile Strength Break, TD (ASTM D882) in MPa (psi) Yes No 18.1 (2630)
- Tensile Strength Yield, MD (ASTM D882) in MPa (psi) Yes No 10.3 (1490)
- Tensile Strength Yield, TD (ASTM D882) in MPa (psi) Yes No 12.2 (1770)
- Vicat Softening Point in °C(°F) Yes No 99 (210)
- 광택 (45 degree) Yes No 66 %
- 기능 Yes No Processing, 광학 성능
- 밀도 (ASTM D792) Yes No 0.923 g/cm3
- 슬립 Yes No 아니오
- 안티 블록 Yes No 아니오
- 용융 지수 (g/10min @190°C/2.16 kg) Yes No 2
- 용융 지수 (g/10min @190°C/21.6 kg) Yes No 2
- 절단 신율, MD Yes No 400 %
- 절단 신율, TD Yes No 550 %
- 타이 레이어 Yes No 아니오
- 타입 Yes No Breathable Blown Film, Breathable Cast Film
- 프로세스 Yes No Blown 필름 압출, 캐스트 필름
- 흐릿해짐 (ASTM D1003) Yes No 7.5 %
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음 자세한 내용은 Dow에 문의 하십시오.
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음
자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material 자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material
자세한 내용은 Dow에 문의 하십시오.
선택한 언어로 작성된 자재 판매 사양 찾지 못함
모든 제품은 동일한 배송일로 주문하여야 합니다.
모든 제품은 동일한 제품군에 있어야합니다.
모든 제품은 동일한 주문으로 구매해야합니다.
모든 제품은 동일한 플랜트에서 출하해야합니다.
수량({{ajax.content.bundlePriceData.priceTable.qtyUnitSapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
---|---|
{{price.fromQuantity}} + {{price.fromQuantity}} - {{price.toQuantity}} {{price.fromQuantity}} + | {{price.priceData.formattedValue}} |
수량({{ajax.content.bundlePriceData.priceTable.sapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
1 + | {{ajax.content.bundlePriceData.priceTable.displayFlatPrice}} |