DOW™ LDPE 410E Low Density Polyethylene Resin
A high clarity resin designed for lamination film and clarity over wrap applications. This resin does not contain slip and antiblock additives. It can be readily extruded using conventional blown film techniques utilising melt temperatures between 170 and 195°C and cast film using temperatures between 180 and 240 °C. This resin when properly fabricated shows: excellent processability and draw down, outstanding toughness and impact properties, superior optical properties, excellent tensile and tear strength. Applications: - Lamination films - Food packaging films - Hygiene films - Cast films - Air-bubble film - Foamed PE - Extrusion coating
속성
*이 값은 일반적인 속성이며 제품 사양에는 사용되지 않습니다.
물리적 특성
- 2% Secant Modulus, MD (ASTM D882) in MPa (psi) Yes No 190 (27600)
- 2% Secant Modulus, TD (ASTM D882) in MPa (psi) Yes No 200 (29000)
- Dart Drop Impact (ASTM D1709A) in grams (lbs) Yes No 110 g
- Elmendorf Tear Strength, MD (ASTM D1922) in grams (lbs) Yes No 500 g
- Elmendorf Tear Strength, TD (ASTM D1922) in grams (lbs) Yes No 400 g
- Tensile Strength Break, MD (ASTM D882) in MPa (psi) Yes No 22 (3190)
- Tensile Strength Break, TD (ASTM D882) in MPa (psi) Yes No 20 (2900)
- Tensile Strength Yield, MD (ASTM D882) in MPa (psi) Yes No 10 (1450)
- Tensile Strength Yield, TD (ASTM D882) in MPa (psi) Yes No 11 (1600)
- Vicat Softening Point in °C(°F) Yes No 96 (205)
- 광택 (45 degree) Yes No 80 %
- 기능 Yes No Mechanical Performance, 광학 성능
- 밀도 (ASTM D792) Yes No 0.925 g/cm3
- 슬립 Yes No 아니오
- 안티 블록 Yes No 아니오
- 용융 지수 (g/10min @190°C/2.16 kg) Yes No 2
- 절단 신율, MD Yes No 450 %
- 절단 신율, TD Yes No 650 %
- 타입 Yes No Breathable Blown Film
- 폐쇄 유형 Yes No Caps, 탭 끌어오기
- 프로세스 Yes No Blown 필름 압출, 캐스트 필름
- 흐릿해짐 (ASTM D1003) Yes No 6.9 %
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음 자세한 내용은 Dow에 문의 하십시오.
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음
자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material 자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material
자세한 내용은 Dow에 문의 하십시오.
선택한 언어로 작성된 자재 판매 사양 찾지 못함
모든 제품은 동일한 배송일로 주문하여야 합니다.
모든 제품은 동일한 제품군에 있어야합니다.
모든 제품은 동일한 주문으로 구매해야합니다.
모든 제품은 동일한 플랜트에서 출하해야합니다.
수량({{ajax.content.bundlePriceData.priceTable.qtyUnitSapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
---|---|
{{price.fromQuantity}} + {{price.fromQuantity}} - {{price.toQuantity}} {{price.fromQuantity}} + | {{price.priceData.formattedValue}} |
수량({{ajax.content.bundlePriceData.priceTable.sapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
1 + | {{ajax.content.bundlePriceData.priceTable.displayFlatPrice}} |