DOW™ DNDA-8320 NT 7 Linear Low Density Polyethylene Resin
This is for injection molding and general purpose applications. It has excellent low temperature impact strength, rigidity, stress crack resistance and processabilitym and very narrow molecular weight distribution.
속성
*이 값은 일반적인 속성이며 제품 사양에는 사용되지 않습니다.
물리적 특성
- 2% Secant Modulus, MD (ASTM D790B) in MPa (psi) Yes No 386 (56000)
- 2% Secant Modulus, TD (ASTM D790B) in MPa (psi) Yes No 386 (56000)
- Vicat Softening Point in °C(°F) Yes No 93.9 (201)
- 강화 LLDPE Yes No 아니오
- 구조 유형 Yes No Monolayer, 멀티레이어
- 기능 Yes No Mechanical Performance
- 녹는 점, DSC (Dow Method) in °C(°F) Yes No 123 (253)
- 밀도 (ASTM D792) Yes No 0.924 g/cm3
- 슬립 Yes No 아니오
- 안티 블록 Yes No 아니오
- 용융 지수 (g/10min @190°C/2.16 kg) Yes No 20
- 프로세스 Yes No Injection Molding
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음 자세한 내용은 Dow에 문의 하십시오.
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음
자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material 자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material
자세한 내용은 Dow에 문의 하십시오.
선택한 언어로 작성된 자재 판매 사양 찾지 못함
모든 제품은 동일한 배송일로 주문하여야 합니다.
모든 제품은 동일한 제품군에 있어야합니다.
모든 제품은 동일한 주문으로 구매해야합니다.
모든 제품은 동일한 플랜트에서 출하해야합니다.
수량({{ajax.content.bundlePriceData.priceTable.qtyUnitSapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
---|---|
{{price.fromQuantity}} + {{price.fromQuantity}} - {{price.toQuantity}} {{price.fromQuantity}} + | {{price.priceData.formattedValue}} |
수량({{ajax.content.bundlePriceData.priceTable.sapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
1 + | {{ajax.content.bundlePriceData.priceTable.displayFlatPrice}} |