DOW™ DNDA-1055 NT 7 Linear Low Density Polyethylene Resin
This product is produced using UNIPOL™ PE Process Technology and is intended for high-speed injection molding of thin-walled parts such as lids. This resin has been designed to have an excellent balance of processability and impact strength. The main characteristics are: excellent processability, good low temperature impact strength, balanced density and melt index.
속성
*이 값은 일반적인 속성이며 제품 사양에는 사용되지 않습니다.
물리적 특성
- 2% Secant Modulus, MD (ASTM D790B) in MPa (psi) Yes No 469 (68000)
- 2% Secant Modulus, TD (ASTM D790B) in MPa (psi) Yes No 469 (68000)
- 강화 LLDPE Yes No 아니오
- 기능 Yes No Mechanical Performance
- 밀도 (ASTM D792) Yes No 0.928 g/cm3
- 슬립 Yes No 아니오
- 안티 블록 Yes No 아니오
- 용융 지수 (g/10min @190°C/2.16 kg) Yes No 85
- 폐쇄 유형 Yes No Lids
- 프로세스 Yes No Injection Molding
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음 자세한 내용은 Dow에 문의 하십시오.
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음
자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material 자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material
자세한 내용은 Dow에 문의 하십시오.
선택한 언어로 작성된 자재 판매 사양 찾지 못함
모든 제품은 동일한 배송일로 주문하여야 합니다.
모든 제품은 동일한 제품군에 있어야합니다.
모든 제품은 동일한 주문으로 구매해야합니다.
모든 제품은 동일한 플랜트에서 출하해야합니다.
수량({{ajax.content.bundlePriceData.priceTable.qtyUnitSapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
---|---|
{{price.fromQuantity}} + {{price.fromQuantity}} - {{price.toQuantity}} {{price.fromQuantity}} + | {{price.priceData.formattedValue}} |
수량({{ajax.content.bundlePriceData.priceTable.sapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
1 + | {{ajax.content.bundlePriceData.priceTable.displayFlatPrice}} |