DOW™ DMDA-8950 NT 7 High Density Polyethylene Resin
This product is produced via UNIPOL™ Process Technology from Dow and is intended for use in thin-wall injection molding applications such as food containers, including freezer applications. This resin has been designed to provide a good impact/stiffness balance as well as excellent processability. The main characteristics of this product are injection molding, for injection molded thin-wall food containers, including freezer applications, high flow for processing ease and very narrow molecular weight distribution.
속성
*이 값은 일반적인 속성이며 제품 사양에는 사용되지 않습니다.
물리적 특성
- 2% Secant Modulus, MD (ASTM D882) in MPa (psi) 예 No 576 (83500)
- 2% Secant Modulus, TD (ASTM D882) in MPa (psi) 예 No 576 (83500)
- ESCR-Environmental Stress Crack Resistance (100% IGEPAL) 예 No 6 hr
- Impact Strength in MPa (psi) 예 No 90.4 kJ/m2 (43 ft lb/in2) ASTM D1822
- Tensile Strength Break, MD (ASTM D638) in MPa (psi) 예 No 14.4 (2090)
- Tensile Strength Break, TD (ASTM D638) in MPa (psi) 예 No 14.4 (2090)
- Tensile Strength Yield, MD (ASTM D638) in MPa (psi) 예 No 20.9 (3030)
- Tensile Strength Yield, TD (ASTM D638) in MPa (psi) 예 No 20.9 (3030)
- 구조 유형 예 No Monolayer, 멀티레이어
- 기능 예 No Mechanical Performance
- 밀도 (ASTM D792) 예 No 0.942 g/cm3
- 밀도 범위 예 No .940-.950
- 부서짐성 온도 °C(°F) 예 No -52.8
- 슬립 예 No 아니오
- 안티 블록 예 No 아니오
- 용융 지수 (g/10min @190°C/2.16 kg) 예 No 50
- 용융 지수 (g/10min @190°C/21.6 kg) 예 No 50
- 절단 신율, MD 예 No 37 %
- 절단 신율, TD 예 No 37 %
- 프로세스 예 No Injection Molding
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음 자세한 내용은 Dow에 문의 하십시오.
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음
자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material 자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material
자세한 내용은 Dow에 문의 하십시오.
선택한 언어로 작성된 자재 판매 사양 찾지 못함
모든 제품은 동일한 배송일로 주문하여야 합니다.
모든 제품은 동일한 제품군에 있어야합니다.
모든 제품은 동일한 주문으로 구매해야합니다.
모든 제품은 동일한 플랜트에서 출하해야합니다.
수량({{ajax.content.bundlePriceData.priceTable.qtyUnitSapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
---|---|
{{price.fromQuantity}} + {{price.fromQuantity}} - {{price.toQuantity}} {{price.fromQuantity}} + | {{price.priceData.formattedValue}} |
수량({{ajax.content.bundlePriceData.priceTable.sapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
1 + | {{ajax.content.bundlePriceData.priceTable.displayFlatPrice}} |