DOW™ DMDA-8933 NT 7 High Density Polyethylene Resin
This product is produced via UNIPOL™ Process Technology from Dow and is intended for use in a broad range of injection molding applications such as injection molded containers and thin-walled pails. The product is specifically designed to provide excellent processing in all injection molding equipment. Used for injection molding, narrow molecular weight distribution. It has excellent balance of toughness, and stress crack resistance.
속성
*이 값은 일반적인 속성이며 제품 사양에는 사용되지 않습니다.
물리적 특성
- 2% Secant Modulus, MD (ASTM D882) in MPa (psi) Yes No 1000 (145000)
- 2% Secant Modulus, TD (ASTM D882) in MPa (psi) Yes No 1000 (145000)
- Tensile Strength Break, MD (ASTM D638) in MPa (psi) Yes No 13.8 (2000)
- Tensile Strength Break, TD (ASTM D638) in MPa (psi) Yes No 13.8 (2000)
- Tensile Strength Yield, MD (ASTM D638) in MPa (psi) Yes No 26.9 (3900)
- Tensile Strength Yield, TD (ASTM D638) in MPa (psi) Yes No 26.9 (3900)
- 구조 유형 Yes No Monolayer, 멀티레이어
- 기능 Yes No Mechanical Performance
- 밀도 (ASTM D792) Yes No 0.95 g/cm3
- 밀도 범위 Yes No .940-.950
- 슬립 Yes No 아니오
- 안티 블록 Yes No 아니오
- 용융 지수 (g/10min @190°C/2.16 kg) Yes No 33
- 용융 지수 (g/10min @190°C/21.6 kg) Yes No 33
- 프로세스 Yes No Injection Molding
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음 자세한 내용은 Dow에 문의 하십시오.
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음
자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material 자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material
자세한 내용은 Dow에 문의 하십시오.
선택한 언어로 작성된 자재 판매 사양 찾지 못함
모든 제품은 동일한 배송일로 주문하여야 합니다.
모든 제품은 동일한 제품군에 있어야합니다.
모든 제품은 동일한 주문으로 구매해야합니다.
모든 제품은 동일한 플랜트에서 출하해야합니다.
수량({{ajax.content.bundlePriceData.priceTable.qtyUnitSapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
---|---|
{{price.fromQuantity}} + {{price.fromQuantity}} - {{price.toQuantity}} {{price.fromQuantity}} + | {{price.priceData.formattedValue}} |
수량({{ajax.content.bundlePriceData.priceTable.sapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
1 + | {{ajax.content.bundlePriceData.priceTable.displayFlatPrice}} |