AGILITY™ 1001 Performance LDPE
A high pressure LDPE resin designed specifically to run at faster output rates on blown film lines in blends with LLDPE resins while maintaining bubble stability. The main characteristics are: faster processing LDPE resin, designed for higher output rates in blends with LLDPE resins at 10-20% loading, and optimized molecular structure gives improved optics in blends with LLDPE resins.
속성
*이 값은 일반적인 속성이며 제품 사양에는 사용되지 않습니다.
물리적 특성
- 2% Secant Modulus, MD (ASTM D882) in MPa (psi) Yes No 216 (31400)
- 2% Secant Modulus, TD (ASTM D882) in MPa (psi) Yes No 256 (37200)
- Dart Drop Impact (ASTM D1709A) in grams (lbs) Yes No 70 g
- Elmendorf Tear Strength, MD (ASTM D1922) in grams (lbs) Yes No 270 g
- Elmendorf Tear Strength, TD (ASTM D1922) in grams (lbs) Yes No 95 g
- Puncture Resistance (Dow Method) in joules/cm3 (lbs/in3) Yes No 4.96 J/cm3 (60 ft lb/in3)
- Tensile Strength Break, MD (ASTM D882) in MPa (psi) Yes No 28.6 (4150)
- Tensile Strength Break, TD (ASTM D882) in MPa (psi) Yes No 16.9 (2450)
- Tensile Strength Yield, MD (ASTM D882) in MPa (psi) Yes No 27.6 (4000)
- Tensile Strength Yield, TD (ASTM D882) in MPa (psi) Yes No 12.8 (1850)
- Vicat Softening Point in °C(°F) Yes No 94 (201)
- 광택 (45 degree) Yes No 54 %
- 기능 Yes No Sealant (non-peelable)
- 녹는 점, DSC (Dow Method) in °C(°F) Yes No 109 (228)
- 밀도 (ASTM D792) Yes No 0.92 g/cm3
- 성능 Yes No High Peformance
- 수축 비교 용도 Yes No Retail, 물류
- 슬립 Yes No 아니오
- 안티 블록 Yes No 아니오
- 용융 지수 (g/10min @190°C/2.16 kg) Yes No 0.65
- 절단 신율, MD Yes No 120 %
- 절단 신율, TD Yes No 440 %
- 집착 수지 Yes No 아니오
- 프로세스 Yes No Blown 필름 압출
- 흐릿해짐 (ASTM D1003) Yes No 9 %
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음 자세한 내용은 Dow에 문의 하십시오.
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음
자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material 자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material
자세한 내용은 Dow에 문의 하십시오.
선택한 언어로 작성된 자재 판매 사양 찾지 못함
모든 제품은 동일한 배송일로 주문하여야 합니다.
모든 제품은 동일한 제품군에 있어야합니다.
모든 제품은 동일한 주문으로 구매해야합니다.
모든 제품은 동일한 플랜트에서 출하해야합니다.
수량({{ajax.content.bundlePriceData.priceTable.qtyUnitSapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
---|---|
{{price.fromQuantity}} + {{price.fromQuantity}} - {{price.toQuantity}} {{price.fromQuantity}} + | {{price.priceData.formattedValue}} |
수량({{ajax.content.bundlePriceData.priceTable.sapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
1 + | {{ajax.content.bundlePriceData.priceTable.displayFlatPrice}} |