AFFINITY™ PL 1845G Polyolefin Plastomer
A Polyolefin Plastomer (POP) produced using INSITE™ Technology from Dow Plastics. It is specifically designed for use as a sealant layer in flexible structures prepared using the cast process.
속성
*이 값은 일반적인 속성이며 제품 사양에는 사용되지 않습니다.
물리적 특성
- Elmendorf Tear Strength, MD (ASTM D1922) in grams (lbs) Yes No 180 g
- Elmendorf Tear Strength, TD (ASTM D1922) in grams (lbs) Yes No 360 g
- Heat Seal Initiation Temp in °C(°F) Yes No 99 (210)
- Tensile Strength Break, MD (ASTM D882) in MPa (psi) Yes No 45 (6530)
- Tensile Strength Break, TD (ASTM D882) in MPa (psi) Yes No 33 (4790)
- Vicat Softening Point in °C(°F) Yes No 95 (203)
- 기능 Yes No Sealant (non-peelable)
- 녹는 점, DSC (Dow Method) in °C(°F) Yes No 103 (217)
- 밀도 (ASTM D792) Yes No 0.91 g/cm3
- 슬립 Yes No false
- 안티 블록 Yes No 아니오
- 용융 지수 (g/10min @190°C/2.16 kg) Yes No 3.5
- 절단 신율, MD Yes No 530 %
- 절단 신율, TD Yes No 670 %
- 프로세스 Yes No 캐스트 필름
- 흐릿해짐 (ASTM D1003) Yes No 0.7 %
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음 자세한 내용은 Dow에 문의 하십시오.
이 자재에 대해 이용할 수 있는 안전성 데이터 시트 없음
자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material 자세한 내용은 Dow에 문의 하십시오.
No Food Contact Letters are available online for this material
자세한 내용은 Dow에 문의 하십시오.
선택한 언어로 작성된 자재 판매 사양 찾지 못함
모든 제품은 동일한 배송일로 주문하여야 합니다.
모든 제품은 동일한 제품군에 있어야합니다.
모든 제품은 동일한 주문으로 구매해야합니다.
모든 제품은 동일한 플랜트에서 출하해야합니다.
수량({{ajax.content.bundlePriceData.priceTable.qtyUnitSapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
---|---|
{{price.fromQuantity}} + {{price.fromQuantity}} - {{price.toQuantity}} {{price.fromQuantity}} + | {{price.priceData.formattedValue}} |
수량({{ajax.content.bundlePriceData.priceTable.sapName}}) | 단위 가격({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
1 + | {{ajax.content.bundlePriceData.priceTable.displayFlatPrice}} |