Propriedades

Conforme fornecido
Appearance Grey white
Plasticity 200 mm/100

Conforme curado
Density 1.22 g/cm3
Durometer/Hardness, JIS Type A 50
Tear Strength Die-Angle 26 N/mm
Tensile Elongation 590 %
Tensile Strength 8.6 MPa

Condição de cura
Curing Agent SILASTIC™ RC-4 50P FD Rubber Additive, 0.8 parts
Curing Condition, Molded 10min/170 °C
Curing Condition, Post-cured 4hours/200 °C