Propiedades
Tal como se suministra |
|
|---|---|
| Appearance | Grey white |
| Plasticity | 310 mm/100 |
Tal como se cura |
|
|---|---|
| Density | 1.34 g/cm3 |
| Durometer/Hardness, JIS Type A | 70 |
| Tear Strength Die-Angle | 16 N/mm |
| Tear Strength Die-Crescent | 11 N/mm |
| Tensile Elongation | 330 % |
| Tensile Strength | 5.5 MPa |
Condición de curado |
|
|---|---|
| Curing Agent | SILASTIC™ RC-4 50P FD Rubber Additive, 0.45 parts |
| Curing Condition, Molded | 10min/170 °C |
| Curing Condition, Post-cured | 4hours/200 °C |