Propiedades
Tal como se suministra |
|
|---|---|
| Appearance | Milky white translucent |
| Plasticity | 120 mm/100 |
Tal como se cura |
|
|---|---|
| Density | 1.04 g/cm3 |
| Durometer/Hardness, JIS Type A | 8 |
| Tear Strength Die-Angle | 6 N/mm |
| Tear Strength Die-Crescent | 5 N/mm |
| Tensile Elongation | 1,500 % |
| Tensile Strength | 3.5 MPa |
Condición de curado |
|
|---|---|
| Curing Agent | SILASTIC™ RC-4 50P FD Rubber Additive, 0.8 parts |
| Curing Condition, Molded | 10min/170 °C |
| Curing Condition, Post-cured | 2hours/200 °C |