XIAMETER™ OFX-0203 Fluid

Visión general
Opciones de muestra
Opciones de compra
Contenido técnico
Contenido técnico
Encuentre un distribuidor

100% active alkylaryl polysiloxane fluid. Release agent for molding, extruding and fabricating rubber and plastic parts, and in die casting metals. Release agent in the production of floor mats and tiles, seals, grommets, gaskets, toys, paneling, decorative trim, household appliance assemblies and similar plastic and rubber products that are coated, painted, plated or bonded. May be formulated into automotive polish products for use in garages and body shops where polydimethylsiloxanes could give rise to re-coatablity problems.

Usos:

May be formulated into automotive polish products for use in garages and body shops where polydimethylsiloxanes could give rise to re-coatablity problems
Release agent in the production of floor mats and tiles, seals, grommets, gaskets, toys, paneling, decorative trim, household appliance assemblies and similar plastic and rubber products that are coated, painted, plated or bonded
Parting agent in die casting of aluminum, zinc, magnesium and other metals that are subsequently painted, bonded or plated
Additive or plasticizer in rubber and plastics formulations, including plastisols
When added as a built-in lubricant the fluid can facilitate the assembly of mechanical components and can act as a lubricant in service

Beneficios:

Compatible with most organic coatings and adhesive systems, and permits subsequent coating of fabricated parts without requiring unusual or extraordinary surface preparation
Imparts good gloss and color enhancement
Easy application/buffability
Gives very good durability
Provides a heat-stable film
Clean and easy release of plastics and rubbers
Effective release (parting) agent for die cast metals
Molded parts can be coated/painted/plated without excessive cleaning
Appearance of treated part is unaltered
Good thermal stability allows repeated use at high temperatures without natural breakdown and consequences (build-up on mold etc.)
Mold and die replacement is minimized (reduced maintenance cost)

Propiedades

Estos valores son propiedades típicas y no están destinados para su uso en la preparación de especificaciones.

Propiedades típicas

% Activos Sí No 100 %
Capacidad de Pintura Sí No true
Color Sí No Líquido Transparente Ligeramente Amarillento
Contenido de Activo Sí No 60-100%
Durabilidad / Uso Sí No Aplicación Individual
Gravedad Específica (@ 25C) Sí No 0.912
Moldeado Después de Acabado Sí No Sí
Punto de Inflamación, Copa Cerrada Sí No > 93 °C
Sistema Sí No Base Solvente
Tipo Sí No Fluido / Aceite
Uso Por Encima de 150 °C Sí No No
Validez Sí No 1080 Days
Viscosidad Cinética / Cinemática Sí No 1200 Centistokes
Índice de Refracción Sí No 1.465

Cantidad ({{ajax.content.bundlePriceData.priceTable.qtyUnitSapName}})	Precio unitario ({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}})
{{price.fromQuantity}} + {{price.fromQuantity}} - {{price.toQuantity}} {{price.fromQuantity}} +	{{price.priceData.formattedValue}}
Cantidad ({{ajax.content.bundlePriceData.priceTable.sapName}})	Precio unitario ({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}})
1 +	{{ajax.content.bundlePriceData.priceTable.displayFlatPrice}}