Propiedades
Tal como se suministra |
|
|---|---|
| Appearance | Dark gray |
| Plasticity | 210 mm/100 |
Tal como se cura |
|
|---|---|
| Density | 1.41 g/cm3 |
| Durometer/Hardness, JIS Type A | 55 |
| Tear Strength Die-Angle | 20 N/mm |
| Tear Strength Die-Crescent | 9 N/mm |
| Tensile Elongation | 420 % |
| Tensile Strength | 4.8 MPa |
Condición de curado |
|
|---|---|
| Curing Agent | SILASTIC™ RC-4 50P FD Rubber Additive, 0.5 parts |
| Curing Condition, Molded | 10min/170 °C |
| Curing Condition, Post-cured | 4hours/200 °C |