Propiedades
Tal como se suministra |
|
|---|---|
| Appearance | White |
| Plasticity | 319 mm/100 |
Tal como se cura |
|
|---|---|
| Density | 1.48 g/cm3 |
| Durometer/Hardness, JIS Type A | 60 |
| Tear Strength Die-Angle | 21 N/mm |
| Tear Strength Die-Crescent | 28 N/mm |
| Tensile Elongation | 340 % |
| Tensile Strength | 7.8 MPa |
Condición de curado |
|
|---|---|
| Curing Agent | SILASTIC™ RC-4 50P FD Rubber Additive, 1 parts |
| Curing Condition, Molded | 10min/170 °C |
| Curing Condition, Post-cured | 8hours/200 °C |