Propiedades
key.properties.Title |
|
|---|---|
| Density | 0.952 g/cm3 |
| Melt Index (g/10min @190°C/2.16 kg (ASTM D1238)) | 10 |
app.properties.Title |
|
|---|---|
| Anti-block | No |
| Closure Type | Caps, Hot Fill / Aseptic, Still Water |
| Slip | Yes |
typical.properties.Title |
|
|---|---|
| 2% Secant Modulus, MD (ASTM D882) in MPa (psi) | 1050 (152000) |
| 2% Secant Modulus, TD (ASTM D882) in MPa (psi) | 1050 (152000) |
| Density Range | .951-.960 |
| ESCR-Environmental Stress Crack Resistance (10% IGEPAL) | 12 hr |
| ESCR-Environmental Stress Crack Resistance (100% IGEPAL) | 22 hr |
| Fabrication Method | Compression Molding, Injection Molding |
| Functionality | Mechanical Performance |
| Tensile Elongation at Break, MD | 1500 % |
| Tensile Elongation at Break, TD | 1500 % |
| Tensile Strength Break, MD (ASTM D638) in MPa (psi) | 20.5 (2970) |
| Tensile Strength Break, TD (ASTM D638) in MPa (psi) | 20.5 (2970) |
| Tensile Strength Yield, MD (ASTM D638) in MPa (psi) | 27.3 (3960) |
| Tensile Strength Yield, TD (ASTM D638) in MPa (psi) | 27.3 (3960) |