SILASTIC™ RTV-4131-P1 Base and Curing Agent
2 part, high strength silicone rubber suited for the production of print pads.
性能
这些数值为典型性能，并且不用于在规格制定过程中使用。
- Approximate De-mold Time 是 否 8 hrs
- Color 是 否 本白色
- Cure Type 是 否 加成固化
- Durometer - Shore A 是 否 25 Shore A
- Elongation 是 否 850 %
- High Tear 是 否 true
- Mixing Viscosity 是 否 13500 Centipoise
- Number of Parts 是 否 双组份
- Specific Gravity @ 25C 是 否 1.12
- Tear Strength 是 否 130 ppi
- Tensile Strength 是 否 1080 psi
- Working Time 是 否 45 Minutes
经常被一起购买
-
DOWSIL™ 3-6559 Cure Accelerator
Cure Accelerator, to speed up room temperature cure of all addition-cure (platinum cure) mold making silicone rubbers. It can also be used as a surface treatment to prevent inhibition. Contains a silicone polymer and platinum catalyst.
-
XIAMETER™ PMX-200 Silicone Fluid 50 cSt
100% active, 50 cSt, polydimethylsiloxane polymer. INCI Name: Dimethicone
-
DOWSIL™ HS II Thixotropic Additive
Clear liquid that can be used with DOWSIL™ HS II, HS III, HS IV and with Silastic 3498, E, P-1, S, S-2, T-2, T-4, and V SIlicone Rubbers to produce skin molds on vertical surfaces or from immovable objects.
-
DOWSIL™ 1-2287 Intermediate (MV-CYC-4)
Cure retardant that can be used to slow down room temperature cure of all addition cure (platinum cure) mold making silicone rubbers.
-
DOWSIL™ Cleaner & Surface Prep
Non Ozone depleting, VOC exempt, Silicone cleaner to clean Plastic and Metals, excellent for removing oils, silicone-based car wax and protectants.
此材料没有安全数据说明书 如需了解更多信息，请 联系陶氏。
此材料没有安全数据说明书
如需了解更多信息，请 联系陶氏。
