性能

按供应

Appearance Grey white
Plasticity 240 mm/100

按固化

Density 1.30 g/cm3
Durometer/Hardness, JIS Type A 72
Tear Strength Die-Angle 17 N/mm
Tear Strength Die-Crescent 10 N/mm
Tensile Elongation 240 %
Tensile Strength 6.7 MPa

固化条件

Curing Agent SILASTIC™ RC-4 50P FD Rubber Additive, 0.5 parts
Curing Condition, Molded 10min/170 °C
Curing Condition, Post-cured 4hours/200 °C