性能

按供应

Appearance Grey white
Plasticity 230 mm/100

按固化

Density 1.46 g/cm3
Durometer/Hardness, JIS Type A 72
Tear Strength Die-Angle 19 N/mm
Tear Strength Die-Crescent 7 N/mm
Tensile Elongation 160 %
Tensile Strength 8.7 MPa

固化条件

Curing Agent SILASTIC™ RC-4 50P FD Rubber Additive, 0.8 parts
Curing Condition, Molded 10min/170 °C
Curing Condition, Post-cured 4hours/200 °C