DOWSIL™ CN-8760 Thermally Conductive Encapsulant

Two-part, 1 to 1, room temperature and heat curable to give manufacturing flexibility, gray elastomer with moderate thermal conductivity.



  • Color 深灰色
  • Dielectric Constant at 100 Hz 2.8287
  • Dielectric Constant at 100 kHz 2.7843
  • Dielectric Strength 675 volts per mil v/mil
  • Dielectric Strength (kV/mm) 26 kV/mm
  • Dissipation Factor at 100 Hz 0.0173
  • Dissipation Factor at 100 kHz 0.0025
  • Durometer - Shore A 52 Shore A
  • Number of Parts 双组份
  • Thermal Conductivity 0.66 Watts per meter K
  • Viscosity 2800 mPa.s
  • Viscosity (Part A) 2400 mPa.s
  • Viscosity (Part B) 2394 mPa.s
  • Working Time 120 Minutes
  • DOWSIL™ OS- 20
    An ozone-safe volatile methylsiloxane (VMS) fluid developed specifically for use as a precision cleaning agent and carrier.

  • SYLGARD™ 527 A&B Silicone Dielectric Gel

    A two-part, 1 to 1 mix ratio dielectric gel that is suitable for sealing and protecting various electronic devices, especially those with delicate components.

  • DOWSIL™ 1200 OS Primer
    An air drying primer supplied as a dilute solution of moisture reactive materials in volatile siloxane and is used to improve both the quality and speed of adhesion development to room temperature vulcanizing silicone sealants to a variety of common non-porous substrates.

  • SYLGARD™ 184 Silicone Elastomer Kit

    Two-part, clear, 10:1, RT and heat cure, good strength, UL and Mil Spec, same as SYLGARD™ 182 but with faster RT cure.

  • DOWSIL™ SE 9187 L Adhesive

    One-part, black, clear or white, fast tack-free, controlled volatility adhesive with very low viscosity suitable for display module assembly, PCB protection (conformal coating) and general potting.

  • DOWSIL™ SE 9186 Sealant
    One-part, moisture cure RTV, flowable, fast tack-free, controlled volatility.

  • DOWSIL™ 7091 Adhesive Sealant
    High performance, neutral cure silicone adhesive/sealant.

  • DOWSIL™ 3145 RTV Mil-A-46146 Adhesive / Sealant

    One-part, moisture RTV, non-flow, high strength, UL and Mil Spec.

  • DOWSIL™ 1-4173 Thermally Conductive Adhesive

    One-part gray, flowable thermally conductive adhesive with high tensile strength.

  • DOWSIL™ TC-4525 A/B

    A thermally Conductive Gap Filler offers thermal conductivity of 2.5W/m.K. This is a soft and compressible silicone material designed to dissipate heat from electronic modules by conducting it to a heat sink such as an aluminum housing. Excellent fit for automotive electronics and battery packs applications.

如需了解更多信息,请 联系陶氏


DOWSIL™ CN-8760 Thermally Conductive Encapsulant
如需了解更多信息,请 联系陶氏

DOWSIL™ CN-8760 Thermally Conductive Encapsulant


DOWSIL™ CN-8760 Thermally Conductive Encapsulant
如需了解该产品的经销商选项,请 联系陶氏