DOWSIL™ 888 Silicone Joint Sealant
用途:
- New construction, repair or remedial applications
优势:
- Can be extruded from -20 to 120°F.
- May be used in joints that are not uniform in width.
- Movement capability 100% extension and 50% compression.
- Low modulus.
- Weather and UV resistant.
- Fuel resistant-short term exposure. Refer to Dow form number 62-207 for more information.
- One component, cold applied, ready-to-use as supplied; dispensed directly from the bulk container into the joint by hand or with an air-powered pump.
- Unprimed adhesion – primer is not required for bonding to Portland cement concrete. For optimum adhesion, the surface must be clean, dry and frost-free.
- Cure time – typically, the sealant will have a skin-over time of one hour or less at standard conditions.
性能
这些数值为典型性能,并且不用于在规格制定过程中使用。
典型性能
- 位移 是 否 中等
- 使用位置 是 否 工作地点
- 保质期 是 否 360 Days
- 化学 是 否 中性
- 固化体系 是 否 单组分固化
- 基材 是 否 多孔
- 外观 是 否 不透明
- 完全粘合时间 是 否 14 to 21 Days
- 室温固化-天数 是 否 7 to 14 Days
- 应用温度范围 是 否 -29 to 49 °C
- 延伸率 是 否 > 1000 %
- 抵御种类 是 否 喷气燃料阻力, 抗油污, 抗紫外线, 热阻, 耐臭氧, 防水
- 无底涂剂的粘合力 是 否 无需底涂
- 模量@150%延伸率,最大 是 否 28 psi
- 比重 @ 25C 是 否 1.48
- 流平 是 否 无流挂
- 相对湿度50%时的表干时间 是 否 60 Minutes
- 硬度-Shore A 是 否 15 Shore A
- 组分 是 否 单组份
- 防水 是 否 true
- 颜色 是 否 灰色
此材料没有安全数据说明书 如需了解更多信息,请 联系陶氏。
此材料没有安全数据说明书
如需了解更多信息,请 联系陶氏。
该材料无在线“食品接触材料合规文件” 如需了解更多信息,请 联系陶氏。
该材料无在线“食品接触材料合规文件”
如需了解更多信息,请 联系陶氏。
没有找到此材料按所选语言显示的销售规格
所有产品必须为同一交货日。
所有产品必须在同一个产品系列中
所有产品必须以相同的顺序购买
所有产品必须从同一工厂运输
数量 ({{ajax.content.bundlePriceData.priceTable.qtyUnitSapName}}) | 单价 ({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
---|---|
{{price.fromQuantity}} + {{price.fromQuantity}} - {{price.toQuantity}} {{price.fromQuantity}} + | {{price.priceData.formattedValue}} |
数量 ({{ajax.content.bundlePriceData.priceTable.sapName}}) | 单价 ({{ajax.content.bundlePriceData.priceTable.currency}}/{{ajax.content.bundlePriceData.priceTable.sapName}}) |
1 + | {{ajax.content.bundlePriceData.priceTable.displayFlatPrice}} |