DOW BG 10150 HDPE Resin

Melt Index 190/5 - 0.4 g/10 min
Density - 0.958 g/cm3
Technical Data Sheet - English (77KB PDF)

Background

DOW BG 10150 HDPE Resin is a high-density polyethylene resin which contains a well dispersed carbon black and the additional stabilizers required for pressure pipe applications.

DOW BG 10150 HDPE Resin has been designed for applications requiring high strength and fracture toughness. The LPL (Lower Prediction Limit) at 20°C is greater than 8 MPa, which qualifies this resin as a PE 80 material.

Processability

DOW BG 10150 HDPE Resin can be extruded using conventional techniques at temperature profiles between 190 and 230°C with a melt temperature between 200 and 220°C.

Applications

PE 80 pressure pipe for general-purpose water supply and gas distribution
Pipe fittings


Why Choose Plastics History of Plastic Pipes Why Work with Dow? Markets Hot and Cold Water Pipes Adhesives PE-RT Multilayer Pipes Non-Pressure Pipes New Developments Adhesives for Aluminum Multilayer Pipes Industrial Applications Industrial Pipes Road Heating and Cooling Steel Pipe Coating Products Adhesives DOWLEX PE-RT Resins DOWLEX 2388 PE Resin DOWLEX 2344 PE Resin Polypropylene Resins INSPIRE 114 Performance Polymer News Dow introduces new adhesive for hot and cold water pipe structures Dow Introduces New High Performance PE Resin for Geomembranes Dow Underscores Commitment To Pipe Market at 2006 Plastics Pipes XIII Conference PlasticsEurope and TEPPFA Launch a Website With News On The Economic and Environmental Benefits of Plastic Pipes Approvals and Certifications DOWLEX PE-RT Testing Institute Reports CUAP and CE marking Literature REACH Subscribe to Pipes Insights Thank you Contact Us Thank you Plastic Pipes EMEA Home	DOW BG 10150 HDPE Resin Melt Index 190/5 - 0.4 g/10 min Density - 0.958 g/cm3 Technical Data Sheet - English (77KB PDF) Background DOW BG 10150 HDPE Resin is a high-density polyethylene resin which contains a well dispersed carbon black and the additional stabilizers required for pressure pipe applications. DOW BG 10150 HDPE Resin has been designed for applications requiring high strength and fracture toughness. The LPL (Lower Prediction Limit) at 20°C is greater than 8 MPa, which qualifies this resin as a PE 80 material. Processability DOW BG 10150 HDPE Resin can be extruded using conventional techniques at temperature profiles between 190 and 230°C with a melt temperature between 200 and 220°C. Applications PE 80 pressure pipe for general-purpose water supply and gas distribution Pipe fittings
	Plastic Pipes EMEA Home Dow Home Privacy Statement Terms of Use Accessibility Statement Site Map Copyright © The Dow Chemical Company (1995-2009). All Rights Reserved.